X750 with ATT

guy · 2020-10-06T10:57:50.484Z

Looking at purchasing a x750 for att in the US. Curious which modem is the best choice and if both modems are capable of having imei altered.

Thanks in advance.

RichP · 2020-10-06T13:01:49.440Z

EP06-A will be faster with CAT6 (Carrier Aggregation) if the tower near you supports it.

guy · 2020-10-06T13:03:34.324Z

Thanks. Can it identify as a iPad?

RichP · 2020-10-06T13:04:28.739Z

I think all Quectel modems can.

guy · 2020-10-06T13:08:51.437Z

Just via ash commands issued by putty or comparable? Nothing special needed?

RichP · 2020-10-06T13:09:54.901Z

It is done via an AT command

guy · 2020-10-06T13:19:41.270Z

Just through putty?

20 characters

RichP · 2020-10-06T17:23:52.033Z

Through the GL web interface

abhigarg6 · 2020-11-29T23:08:25.047Z

Hi, I am trying to change it via Luci GUI under AT commands, but always getting error. any insights please. I am trying to set ipad imei here.

alzhao · 2020-11-30T09:03:59.415Z

Are you doing like this?

Access the router UI and record the current IMEI
Get a new IMEI for debug purpose
On the router UI, find “AT Command”, then use the following AT command to wite the new IMEI (for example 861585040740945)

AT+EGMR=1,7,“861585040740945”

Check if you can connect to carrier network. If yes then use the following AT command to save the IMEI to the module.

AT+QPRTPARA=1

abhigarg6 · 2020-12-01T03:57:17.931Z

Hi Alzhao,

Thanks for responding. Problem is I am not able to run any AT command, modem always responds back with error. I have tried to set imei for testing purpose, band locking etc, but modem always is giving error.

What could be the issue, is it modem faulty or something is locked which is preventing me to execute these commands.

robotluo · 2020-12-01T04:31:20.801Z

Can you provide a screenshot?
Is an ERROR message popping up at the top of the browser or is the result returned an ERROR?

abhigarg6 · 2020-12-01T05:13:13.364Z

result is returned as error.

guy · 2021-01-02T18:48:56.157Z

Make sure you have a sim installed.