ZeroTier plug-in Setup on a Slate Plus

Terk · 2022-11-28T02:41:43.662Z

I found some good information on the forum at
https://forum.gl-inet.com/t/ar750s-zerotier-setup-guide/6385

but wanted to be able to get to all of the client devices on the subnet as well so found this link very helpful in setting it up how I wanted it.
https://kysonlok.gitbook.io/blog/vpn/zeretier

jdub · 2022-11-28T02:45:34.631Z

What speeds are you seeing on ZeroTier, if you don’t mind my asking? You can do something similar with Tailscale which is running at probably 80% of OpenVPN speed on the routers I’ve tried.

It would be better if mwan3 played nice with the various setups (Tailscale has been reworked to fix the issue, but I think something about gl-inet’s implementation in 4.X is non-standard, which makes it not work again). It’s really a shame it isn’t supported natively, given that the CLI syntax is simple and the functionality is great.

Terk · 2022-11-28T03:09:43.836Z

I haven’t done any benchmarks yet as my intent was to use it to configure settings on a few devices remotely and I don’t have a file server on the remote side. I forgot Tailscale was an option for this as well, thanks.

jdub · 2022-11-28T03:26:16.635Z

Sure… I’m considering writing a basic Tailscale guide up, if I get the chance. I’d like to get it working without nuking all of the GLI firmware, but… that takes time.

Terk · 2023-06-17T21:23:03.262Z

Upgrading the firmware to 4.2.1 broke the ZeroTier integration I had and the built in integration they added with 4.2 doesn’t work on that router either probably because of some of the changes I had to make to get it working originally. I’ll probably have to restore factory settings to get the new ZeroTier integration to work.