Accessing Tor firmware admin ui on MIFI (no hardware switch)

[bocceannapolis]

Hello guys, I flashed the latest tor firmware for my mifi but can’t find a way to access its administration panel. Following these instructions:
MiFi don’t have a Tor firmware itself. Use AR150 1.3 instead

You need to move the hardware switch to the right side if you want to access the UI . Otherwise you are connecting to the Tor network and will not be able to access the UI.

Tor - GL.iNet Docs

[alzhao]

while this is a problem. Because you have no access to the router you cannot do anything.

You still can flash the stock firmware back using Luci.

[bocceannapolis]

Got it, I flashed original firmware using uboot

Uboot GL-MiFi

Just some clarification here on uboot mode on the GL-MiFi. I went to reload the latest firmware however after reading the instructions, they all kind of related to units with fewer lights and refers to fingers (for the reset buttons on the other models) and I found it a bit confusing. So for uboot mode on the GL-MiFi: Set your PC ethernet port to 192.168.1.2 and connect ethernet cable from PC to LAN port Press and hold the reset button (with a paperclip or toothpick or… ) Power on the unit (h…