Add AQL support to Flint 2 firmware

Router
1

Hi GL.iNet team,

Could you please enable CONFIG_MAC80211_DEBUGFS in Flint 2 (GL-MT6000) firmware?

This would expose /sys/kernel/debug/ieee80211/phy*/aql_txq_limit for Aggregate Queue Limit (AQL) tuning — already supported by the mt76 driver used on the Flint.

This tweak is useful for improving Wi-Fi latency and works well in conjunction with Cake/SQM on the WAN side.

Thanks in advance!

1 Like
3

hello, Glnetvoyager

You can download and upgrade the open source firmware for the Flint 2 (GL-MT6000) from the official website. On the open source firmware, we have already enabled CONFIG_MAC80211_DEBUGFS, and you can adjust the Aggregate Queue Limit (AQL).

Thanks.

4

Thanks,

Would I be able to keep the stock GUI as well? Or must I have to go Native OpenWrt. I don't want to lose the GUI

5

Yes, upgrading to open source firmwarm can keep the stock GUI as well.

The download link is as follows
https://dl.gl-inet.com/router/mt6000/open

3 Likes
6

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.