Hi Alzhao,
Thanks so much for your response. I probably should have done a better job explaining my issue.
Current setup:
- Current network (router #1) is 192.168.0.x
- GL-3000N-V2 (router #2) is 192.168.8.x and connected via WAN port to router one’s LAN port.
- I also have LAN to LAN wire going between each router.
- Router one assigns GL router an IP address of 192.168.0.241.
- I have a static route on router one of 192.168.8.0 → 192.168.0.241
If I change a computer or mobile device’s ip address to 192.168.8.x I am able to access the admin panel via 192.168.8.1 but I am unable to access the admin panel when device is set to 192.168.0.x. I have tried accessing via 192.168.0.241 which I would expect to work as well as 192.168.8.1 which I would expect not to work.
So my theory was that since 192.168.0.241 is actually the WAN port on GL Router, the GL router must need to be enabled to allow admin panel access via WAN port.
The simple question really is how can I access the GL admin panel from a device on a different subnet?
CG
UPDATE- Alzhao- apologies for doubting: Your suggestion is indeed the solution! I initially took your suggestion only as a way to register a dynamically changing IP address. Thanks so much- I am now able to access GL-Router from devices with router #1 subnet!!