ATX board no appearing on Accessories

KVM
1

Installed the ATX accessory and front works. USB C cable and do hear the confirmation from windows. On the GLKVM site ATX does appear on site. Any solutions for this? I did update the GlNet firmware.

2

Please try reconfiguring the ATX board by following this guide:

Once you've done that, open the terminal and run the following command:

打开终端
打开终端770×877 131 KB

ls -l /dev/ttyACM*

Then, please share the output with us and export the logs from the KVM console.

设备日志导出
设备日志导出1895×682 307 KB

Thanks again for your help — we'll take it from there.

4

Thank you, figured out issue, had to replace the ATX card.