Beryl LED config

[alzhao]

Pls do according to this guide. It is different from openwrt

GL-MT1300 LED control instructions

#stop glinet control /etc/init.d/led stop /etc/init.d/led disable #reset I2C IC echo 0 > /sys/class/leds/gl-mt1300:blue/brightness echo 0 > /sys/class/leds/gl-mt1300:white/brightness i2cset -f -y 0 0x30 0x00 0x1F i2cset -f -y 0 0x30 0x00 0x1A #adjust brightness i2cset -f -y 0 0x30 0x06 0x3f #blue 0x3f * 0.125mA = 8mA i2cset -f -y 0 0x30 0x07 0x7f #white 0x7f * 0.125mA = 16mA #light up LED i2cset -f -y 0 0x30 0x04 0x01 i2cset -f -y 0 0x30 0x04 0x04 #put out LED i2cset -f -…