Brume 2 does not Recognize WAN Cable

[elmaji]

My Brume 2 which I just purchase does not currently recognize the Ethernet cable connected to the WAN port. If I switch the WAN port to LAN mode, it recognizes the cable; and I've tried several other cables beyond the stock one that comes with the device.

The device is connected to an AT&T Fiber internet Gateway - PACE 5268AC

The device is running 4.5.16 out of the box.

I am attaching the recent log file of the router. I'm not sure what I would need to do to resolve this issue.

Thank you.

logread (4).tar (121.5 KB)

[kaz050457]

if wan port is hardware broken. U can use the usb port, attach a USB Ethernet.

[elmaji]

It's a brand new item out of the box. I'll sooner return it to Amazon.

[hecatae]

You can swap the LAN and WAN ports:

Weird issue on Beryl AX and Brume 2 with a PPPoE FTTP connection

According to the syslog, it was not related to the PPPoE program, probably is the port negotiation rate (compatible) issue of the ONT to Brume2, which could prevent the Brume2 WAN up. Please try to replace the new/high quality network cable. If no luck, try to set the second LAN port as WAN, to see if it is compatible issue of the 2.5G port. Do them in the SSH: uci set network.@device[2].name='eth1' uci set network.wan.device='eth1' uci set network.@device[0].ports='eth0' uci set network.@dev…

If the WAN works on eth1 and not eth0, please let us know