Brume 2 - VPN Client

Technical Support for Routers
1

Hi there

I own a Brume 2 which is part of my network:
Brume2 WAN port connects to my Router’s LAN port to get internet (192.168.1.x)
Brume2 LAN port connects to a switch and creates a new VLAN (192.168.200.x)

How can I connect to the Brume2 outside of the VLAN it creates (192.168.200) to activate the VPN Client whenever I needed it?

I also added the Brume2 to Good Cloud and I can see it in the GLInet iOS app but I can’t activate VPN because it says: “this option is only available when you control this device locally”.

Thanks

2

If you are sure that your router is secure, open ports 80 and 443 on the Brume2. Afterwards, client devices connected to your router can access it via the WAN IP of Brume2 (192.168.1.x).
In the app, open the sidebar, click Add Device, select Initialized Device and enter the WAN IP of Brume2 (192.168.1.x).