Brume 3.102-0120 package issues

tried to install nano, I guess everyone at gli uses vi.

login# opkg install nano
Installing nano (4.3-1) to root…
Downloading http://download.gl-inet.com/releases/packages-3.x/mvebu/packages/nano_4.3-1_aarch64_cortex-a53.ipk
Collected errors:

  • satisfy_dependencies_for: Cannot satisfy the following dependencies for nano:
  • libncurses6
  • opkg_install_cmd: Cannot install package nano.

also the ‘kmod-usb-net-rtl8152’ driver for the usb150 is unavailable.

was this test image allowed to be used intentionally not allowing additional packages to be installed or was it in error? please let me know cause I went back to the previous distfeeds.conf and I also point back to openwrt’s rc1 and got nano installed.

3.027 /etc/opkg/distfeeds.conf below

src/gz glinet_core http://download.gl-inet.com/releases/kmod-3.2/mvebu/cortexa53
src/gz glinet_base http://download.gl-inet.com/releases/packages-3.x/mvebu/base
src/gz glinet_gli_pub http://download.gl-inet.com/releases/packages-3.x/mvebu/gli_pub
src/gz glinet_packages http://download.gl-inet.com/releases/packages-3.x/mvebu/packages
src/gz glinet_luci http://download.gl-inet.com/releases/packages-3.x/mvebu/luci
src/gz glinet_routing http://download.gl-inet.com/releases/packages-3.x/mvebu/routing
src/gz glinet_telephony http://download.gl-inet.com/releases/packages-3.x/mvebu/telephony
src/gz glinet_glinet http://download.gl-inet.com/releases/packages-3.x/mvebu/glinet

3.102-0120 /etc/opkg/distfeeds.conf below

src/gz glinet_gli_pub http://download.gl-inet.com/releases/packages-3.x/mvebu/gli_pub
src/gz glinet_packages http://download.gl-inet.com/releases/packages-3.x/mvebu/packages
src/gz glinet_luci http://download.gl-inet.com/releases/packages-3.x/mvebu/luci
src/gz glinet_routing http://download.gl-inet.com/releases/packages-3.x/mvebu/routing
src/gz glinet_telephony http://download.gl-inet.com/releases/packages-3.x/mvebu/telephony
src/gz glinet_glinet http://download.gl-inet.com/releases/packages-3.x/mvebu/glinet
#src glinet_glinet file:/home/zl/gl-image/gl-image/releases-packages/mvebu/glinet

I have the latest version and I cannot install nano.

Does early version work?

Nothing is removed intentionally but engineers rush to holiday and will not work for 2 weeks.

3.027 works
I reported same issue for 3.101-0103 on jan 3

in webadmin the following are removed intentionallly but not necessary, guest, wireless just wondered if he should have removed plugins too. :wink:

sometimes its good to remove things/functionality to isolate problems.

I also wondered if it was a location issue.

because he had
#src glinet_glinet file:/home/zl/gl-image/gl-image/releases-packages/mvebu/glinet

commented out, but it got me to thinking that sometimes during your testing it works within your network but doesn’t get tested from a truly external environment.

I know these are testing/beta bins but somepeople are looking foward to increased functionality use this route and I guess this thread is hear to help them save some time.

fyi i created a guest network on lan1 and separated lan from lan1 and created a guestzone just like the other products hoping gl-webadmin would show guest features like the other routers… didn’t happen.

copied 3.027 /etc/opkg/distfeeds.conf

able to get nano installed but not ‘kmod-usb-net-rtl8152’

but wireless starting to work with specific usb adapter is a promising step forward.

OK. Thanks for your feedback.

Guys went to holiday so I cannot get an answer for you about the repo change.