Cannot access local LAN via VPN running Wireguard Server on MT6000

Technical Support for Routers VPN, DNS, Leaks
1

Hi,
I know this topic has been covered in my topics however I cannot find a resolution for me.
I'm running Wireguard Server on my Flint2 router running 4.7.7 fw.
VPN works as I can connect to it remotely and access the internet via the VPN, but not my LAN resources on 192.168.2.0/24

Router LAN config: 192.168.2.0/24
LAN Gateway: 192.168.2.1
Wireguard Svr config: 10.0.0.1/24
2 Wireguard clients are defined 10.0.0.2/24 and 10.0.0.3/24 and both can connect to the VPN successfully and the internet via the VPN but not the LAN ressources and various hosts.

in WG Server options.

  • Remote LAN access : enabled
  • IP masqueradiing : disabled
  • Client to client :disabled.

No route rules are defined either (I've tried with no success either)

is it possible to access both the internet and my LAN ? what routing config must I add and where, using GUI or Luci.

Thanks !

3

Can you get this enabled?

4

I've just enabled and still cannot access the devices LAN subnet.
I can access the router using the VPN gateway IP: 10.0.0.1 but not its LAN IP 192.168.2.1

5

I tried mine (not MT6000), 192.168.2.1 should just be accessible if you enable "Remote LAN access".

6

I did activate it but it’s not working.
I’ll reset and reconfigure the router from scratch in the next days and will let you know.

7

I've fully reset and reconfigured the router and it now works with the standard settings. I guess that some subsequent config changes I did must have corrupted the VPN server config.
So all good !

8

I have not reactivated IP V6 yet, not sure if it will impact