Can't reach remote router interface across openvpn connection

[will.qiu]

Hi

Have you checked the firewall rules and used TCPDump, as mentioned in a previous post, to capture traffic in order to determine which device the problematic traffic is terminating at?

OpenVPN - how to control access to network resources based on username

I tried this and am not having any luck. I have turned off masquerading on the ovpnserver zone in the firewall so there is routing all the way across the tunnel. I do not have any subnet IP address overlaps. The CCD DHCP reservation for the tunnel endpoint on the client is working. I have set up routing from the Flint to the Slate LAN with a routing rule directing traffic to the reserved tunnel endpoint and that works. I am using Policy routing instead of Global on the Slate. I built a rou…