Compare perf of WG on Beryl AX

[demonx]

Today i compared performance test of wireguard on same conditions. On gl.inet firmware 4.5 based on openwrt 21.02 i get 370 Mb/s, but on vanilla openwrt 23.05.2 i get 500 Mb/s. Interesting when developers will release new firmware based on new openwrt version.

[bring.fringe18]

Did you have any trouble/discover any issues flashing vanilla? This is only the second time I’ve ever seen anyone report flashing full OWRT on a Beryl AX. How’s the Wi-Fi speed, range, etc.?

[raphamotta]

I also didi it. The wifi range on vanilla OpenWRT is much better too.

MT3000 (Beryl AX) Maximum transmit power stuck at 100mW/20dBm

Great so I think my unit is not defective and 20dBm is the limit in gl inet firmware, which is not good since I did some tests and the range is much better on vanilla openwrt with 22dBm and 24dBm. Don’t understand why it’s not like the slate where when you change the country it changes the transmit power values…

Cheers

[ikun]

hi,

We are adapting mt3000 bases on openwrt23.05 and plan to release on v4.6.

@demonx

Interesting when developers will release new firmware based on new openwrt version.

[bring.fringe18]

OpenWrt Version Roadmap Request for Current Product Line

Hello, Now that the Flint 2 (GL-MT6000) has launched w/ OpenWrt v23.05 (kernel version 5.15), may we please have a schedule/table of when other devices can optimistically expect the same treatment? Please note I say optimistically as delays are always expected as bugs are squashed before marking the release ‘stable.’ Related:

[demonx]

@bring.fringe18

Did you have any trouble/discover any issues flashing vanilla? This is only the second time I’ve ever seen anyone report flashing full OWRT on a Beryl AX. How’s the Wi-Fi speed, range, etc.?

It’s very simple:

1. Get from OpenWrt Firmware Selector sysupgrade image.
2. Go to System - Advanced settings in the web of router
3. In LuCI go to System - Backup/Flash Firmware, push “Flash image” button and select file from step 1
   4.After few seconds process complite. New address of router is 192.168.1.1 login root with blank password
   If you want revert original firmware you need do this instruction.
   About issues… I can’t run Wifi 5Ghz with 160Mhz width. Max speed is 700 Mb/s on this firmaware, when about 960Mb/s on original firmware with 160Mhz width.

[demonx]

I try 4.6.0 alfa firmware based on OpenWrt-23.05

Better, but not so good than vanilla firmware.