Create Guest VLAN to Internet only on Bume 3

Router
1

Before I try and break my Brume 3 again having to press the reset button, I thought I would save some time and ask here.

My network configuration:

ISP Modem <=> Brume 3 <=> Brocade ICX managed 24 port switch <=> multiple APs

VLANs have been configured upstream of the Burme 3 on the APs

  • VLAN 1 - untagged
  • VLAN 10 - tagged

I need to connect the switch to a port on the Brume 3 and have VLAN 10 locked-down, Internet access only and VLAN 1 to have full access.

If someone would walk it though using LuCi, it would be greatly appreciated.

2

There is a bug with the Brume 3 so untagged VLANs break if you add a tagged vlan. This is currently still unresolved.

See this quite long thread here

If you have a vlan capable switch, the workaround would be to use two tagged vlans and separate out untagged ports on the switch and not use untagged on the Brume 3.

1 Like
3

That should work. I will explore taking that approach.

Thank you.