I would like to run it off of a one of those usb power packs or a drill battery. If possible in the car or maybe even a car cigarette lighter.
Does anyone know the dc barrel connector size and if a barrel connector usb c converter cable would power it.
Maybe a cord something like this
5ft PD USB Type C Male Input to DC 5.5 x 2.1mm Male Power Charging Cable up to 100W(65W-100W)(5521-100W)
And a power bank like this.
Portable-Charger-Power-Bank - 40000mAh Power Bank PD 30W and QC 4.0 Quick Charging Built-in Bright flashlight LED Display 2 USB 1Type-C Output for Most Electronic Devices on The Market(Carbon Black)
it will be trial and error to find a type c - dc cable that has a working trigger port
try to find earlier discussions in the forum, one fellow owner found that 19v supply is most efficient for the x3000, but so far i have not found a cable that can trigger 19v from a pd or quickcharge charger, they all go to 12v
I used a dewalt “power Wheels “ adapter and a cable to power the router with a 20v dewalt battery Sofar this is working great. Cheap way to make these truly portable.
Where is this available for purchase to check the specs, including the power rating (watts) and the barrel sizes? Also, make sure the polarity (positive/negative) matches that of the center pin and the outside barrel.
