[Feature request] Replace Wireguard with AmneziaWG

Routers
166

Hello,

We released a beta firmware to test the new feature AmneziaWG in a small range, currently available for the Beryl AX/MT3000.

Warm reminder: as it is a test firmware, there may be some instability, please do not use it in the working environment.

Now you can use AmneziaWG to make your VPN connection more robust using AmneziaWG!

Please obtain the test firmware and report the issue from following thread:

  1. You can manually export profiles with obfuscation protocols in AmneziaWG and upload them to your router manually.
  2. If you have two Beryl AX/MT3000s (one for WG server and one for WG client), you can enable "Obfuscation" on the WG server router and generate a new profile with Obfuscation Parameters, and import to WG client router to experience this advanced feature:
    Bruce_2025-09-25_15-07-49
    Bruce_2025-09-25_15-07-491303×951 46.8 KB
10 Likes
167

Awesome news! Thank you.

I did a quick test with 4.8.0 (op24) and my amnezia-kmod module vs 4.8.2-beta3 with native support (as clients). Looks like 4.8.2-beta3 is more stable by speed comparing to 4.8.0+kmod.

Great job. Waiting for release.

2 Likes
168

Just did a quick test from egypt back to germany. The client on my Beryl is working without problems.

1 Like
169

Thanks for your testing!

May I know what are the AmneziaWG speeds of 4.8.0+kmod vs 4.8.2-beta3? Is there any difference between Latency, Jitter and Packet Loss, etc.?

1 Like
170

Thanks for your testing!

May I confirm are you running WireGuard on v4.8.2-beta3 using AmneziaWG profile?
How about the speed?

171

I’m limited by my Egyptian dsl which is 100 MBit down and 30 MBit up. But i was able to use this completly. Will do more testing next week when back in Germany.

1 Like
172

This is not about difference in numbers (they are mostly equal), but during tests beta3 (native support) shows more stable speed (like from 20 to 30 mb/s on my connection) while kmod version jumps from 1mb to 40 and back. Average speed, ping, jitter is the same.

1 Like
173

Many thanks for that. Are you able to tell when this feature will be available on the Flint(s) for this great feature to be implemented?

1 Like
174

those are some awesome news. are there any plans to release it for other router models ? AXT1800 specifically

1 Like
175

Expected on v4.9 firmware for all models.

7 Likes
176

There is related R&D plan, I think in v4.9.

1 Like
177

@bruce @alzhao Fantastic to see Beryl AX support for Amnezia. It must be added to ALL GL devices, please.

Posts about justifying the use of Amnezia (‘why’, ‘where’, ‘how’ it may be used) are irrelevant. There is no need to explain or defend use cases.

1 Like
178

I tested 4.8.2-beta3 AmneziaWG on my Beryl AX and speed-wise was very good, comparable to the AmneziaWG app I have on macOS (~380MBit/s throughput both up and down). Please if you could push a beta/snapshot for Slate AX (AXT1800) I would be glad to test it!

obfuscation settings:
S1 = 0
S2 = 0
H1 = 1
H2 = 2
H3 = 3
H4 = 4

Jc = 4
Jmin = 40
Jmax = 70

4 Likes
179

I used the beta version and it works well, much faster than kmod and easy to use. Also now can use my own wireguard server instead of a commercial one. I also feel more at ease with the kill switch working automatically

1 Like
180

is there a plan to release beta/snapshot for Slate AX (AXT1800)? that would be appreciated!

181

Now just small-scale testing, only for MT3000. Sorry.

It will be supported on v4.9, for AXT1800 may be available in next year.

1 Like
182

Woah this is good news! I have the MT3000. I will help test because I would prefer to use my AXT1800 tbh.

1 Like
183

Have you tried this on the new beta released on 30th September by any chance?

184

Their changelog is not good at all!

They released a new version without any detail :frowning:

3 Likes
185

How secure is the killswitch. This is my main concern. I absolutely cannot have leakage. I’m considering connect my MT3000 running AWG to my AXT1800 running WG to be on the safe side while testing this beta.