Flashback from OpenWRT 21.12.5

[K3rn3l_Ku5h]

Was playing with the OpenWRT 21.12.5 build the GL-ax1800 Flint from the Chinese forum posted by Blaze:

GL-iNet AX1800 OpenWrt firmware

openwrt-ipq60xx-generic-glinet_gl-ax1800-squashfs-nand-factory.bin is ubi format itself, upgrade it by uboot, at page http://192.168.1.1/. you may need to upgrade uboot firstly, and this version is newer than your previous google drive file. upgrade uboot at page http://192.168.1.1/uboot.html.

Got tired of it and flashed back using UBoot wired connection procedure to first to 4.x build Snapshot posted by Gl.inet. Was slow and would not complete initial setup. Then flashed by Uboot to 3.214(Newest) and could not acces the admin GL.iNet UI tried both 192.168.1.1 and 192.168.8.1. Then flashed using uboot to 3.213 same issue can’t access Gl.iNet UI. Flashed again by Uboot using 3.206 still can’t access GL.iNet UI. I am on 3.206 and was able to do the initial set up(Set up admin Password) and SSID but had to connect to using bluetooth and the app. It shows the router firmware 3.206 can change and do everthing in the app but none of my computers can access GL.iNet UI. I can also SSH into the router so I don’t think I bricked it Wireless SSID is broadcasting so setup should be completed. Cleared caches and flushed dns multiple times and have used different computers to acces 192.168.8.1(wired ipconfig default gateway) won’t load. Uboot is 2.0 most current as I took the advice to update be for flashing. I am assuming if the app can work then I should be able to acces GL.iNet UI and something needs to be stopped and restarted using ssh thank you ahead of time

[alzhao]

@K3rn3l_Ku5h

can also SSH into the router so I don’t think I bricked it Wireless SSID is broadcasting so setup should be completed. Cleared caches and flushed dns multiple times and have used different computers to acces 192.168.8.1(wired ipconfig default gateway) won’t load

I don’t understand how. But I used to flash back and force.

[hansome]

Is your uboot version: uboot2.0 version:21.12.01?
You can still ssh into the router, could you print dmesg
and cat /etc/glversion

[Blobbie01]

You need to flash the V3 image in Luci if you have used V4. Uboot doesn’t appear to work when downgrading from the V4 snapshot.

Try resetting the router by pressing the little reset button, then connect to ethernet cable and manually assign the ip “192.168.8.100” (i believe default IP range starts there, might be 150), to your PC, and set default gateway to “192.168.8.1”.

Then try to access it from the web. If able, flash the latest stable firmware through LuCi in system - backup/flash firmware.

Do not keep settings, enable the “force flash” option.

[K3rn3l_Ku5h]

UBoot2.0 version 21.08.21

[K3rn3l_Ku5h]

Did forget to mention that the router is isolated and not connected to the internet right now. GL.iNet UI can’t be access so I will need a procedure to install LuCi by ssh.

[K3rn3l_Ku5h]

[ 2.034182] ubi0: attaching mtd9
[ 2.402737] random: nonblocking pool is initialized
[ 2.502405] ubi0: scanning is finished
[ 2.510100] ubi0: attached mtd9 (name “rootfs”, size 115 MiB)
[ 2.510121] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.514829] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.521586] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.528452] ubi0: good PEBs: 920, bad PEBs: 0, corrupted PEBs: 0
[ 2.535221] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
[ 2.541467] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1648964974
[ 2.548510] ubi0: available PEBs: 0, total reserved PEBs: 920, PEBs reserved for bad PEB handling: 20
[ 2.557806] ubi0: background thread “ubi_bgt0d” started, PID 116
[ 2.568901] hctosys: unable to open rtc device (rtc0)
[ 2.580028] ALSA device list:
[ 2.580047] No soundcards found.
[ 2.679053] VFS: Mounted root (squashfs filesystem) readonly on device 31:13.
[ 2.681026] Freeing unused kernel memory: 1024K (80c00000 - 80d00000)
[ 4.124857] init: Console is alive
[ 4.124966] init: - watchdog -
[ 5.538282] usbcore: registered new interface driver usbfs
[ 5.538341] usbcore: registered new interface driver hub
[ 5.542730] usbcore: registered new device driver usb
[ 5.549663] Button Hotplug driver version 0.4.1
[ 5.556044] exFAT: Version 1.2.9
[ 5.564047] SCSI subsystem initialized
[ 5.570541] libata version 3.00 loaded.
[ 5.574964] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 5.575437] ehci-platform: EHCI generic platform driver
[ 5.583907] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 5.585996] ohci-platform: OHCI generic platform driver
[ 5.592950] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.600780] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy
[ 5.612428] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout
[ 5.612453] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868
[ 5.824633] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.824672] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.829927] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
[ 5.836613] xhci-hcd xhci-hcd.0.auto: irq 189, io mem 0x08a00000
[ 5.845707] hub 1-0:1.0: USB hub found
[ 5.851501] hub 1-0:1.0: 1 port detected
[ 5.855284] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.859131] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.864506] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 5.872356] hub 2-0:1.0: USB hub found
[ 5.880331] hub 2-0:1.0: 1 port detected
[ 5.884895] of_get_named_gpiod_flags: parsed ‘gpios’ property of node ‘/soc/gpio-leds/white[0]’ - status (0)
[ 5.884984] of_get_named_gpiod_flags: parsed ‘gpios’ property of node ‘/soc/gpio-leds/blue[0]’ - status (0)
[ 5.885997] of_get_named_gpiod_flags: parsed ‘gpios’ property of node ‘/soc/gpio_keys/wps[0]’ - status (0)
[ 5.886013] of_get_named_gpiod_flags: parsed ‘gpios’ property of node ‘/soc/gpio_keys/reset[0]’ - status (0)
[ 5.886035] gpio-9 (wps): gpiod_set_debounce: missing set() or set_debounce() operations
[ 5.886080] gpio-18 (reset): gpiod_set_debounce: missing set() or set_debounce() operations
[ 5.886269] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input0
[ 5.889597] usbcore: registered new interface driver usb-storage
[ 5.896482] usbcore: registered new interface driver uas
[ 6.127614] init: - preinit -
[ 8.350627] UBIFS (ubi0:3): default file-system created
[ 8.351317] UBIFS (ubi0:3): background thread “ubifs_bgt0_3” started, PID 155
[ 8.411333] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name “rootfs_data”
[ 8.411361] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.418154] UBIFS (ubi0:3): FS size: 71868416 bytes (68 MiB, 566 LEBs), journal size 3555328 bytes (3 MiB, 28 LEBs)
[ 8.428046] UBIFS (ubi0:3): reserved for root: 3394522 bytes (3314 KiB)
[ 8.438284] UBIFS (ubi0:3): media format: w4/r0 (latest is w4/r0), UUID 12869CDD-9D54-4F5A-B797-B7D673842B75, small LPT model
[ 8.446766] mount_root: overlay filesystem has not been fully initialized yet
[ 8.456383] mount_root: switching to jffs2 overlay
[ 8.727234] procd: - early -
[ 8.727281] procd: - watchdog -
[ 9.378388] procd: - ubus -
[ 10.379112] procd: - init -
[ 10.943766] ubi: mtd9 is already attached to ubi0
[ 11.576353] export_store: status -22
[ 11.732023] cfg80211: World regulatory domain updated:
[ 11.732047] cfg80211: DFS Master region: unset
[ 11.736077] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.740705] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.744295] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 11.758260] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.763226] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.772386] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.780342] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.790059] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.799556] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.807592] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.005306] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1
[ 13.009013] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist!
[ 13.015944] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus
[ 13.022081] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000
[ 13.029201] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000
[ 13.036499] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0
[ 13.042914] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xff
[ 13.048470] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xff
[ 13.054240] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist!
[ 13.060035] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC 94:83:c4:12:15:cb
[ 13.065861] ssdk_dt_parse_intf_mac[683]:INFO:dp2 MAC 94:83:c4:12:15:cc
[ 13.072439] ssdk_plat_init start
[ 13.154970] ssdk_ppe_clock_init[517]:INFO:ppe and uniphy clock init successfully!
[ 13.158171] ssdk_probe[1912]:INFO:ess_rst doesn’t exist!
[ 13.165388] HPPE initializing…
[ 13.166702] malibu_phy_api_ops_init[2849]:INFO:qca probe malibu phy driver succeeded!
[ 13.177708] regi_init[3359]:INFO:Initializing HPPE!!
[ 13.393992] ssdk_ppe_reset_init[801]:INFO:ppe reset successfully!
[ 13.399617] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96
[ 13.403286] qca_hppe_portctrl_hw_init[159]:INFO:Cypress PPE port initializing
[ 13.514390] __adpt_hppe_uniphy_psgmii_mode_set[620]:INFO:uniphy 0 psgmii channel selection
[ 13.729187] ssdk_switch_register[1617]:INFO:Chip version 0x1501
[ 13.732174] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist
[ 13.738407] ssdk_switch_register[1642]:INFO:polling is selected
[ 13.746138] regi_init[3363]:INFO:Initializing HPPE Done!!
[ 13.751059] regi_init[3407]:INFO:qca-ssdk module init succeeded!
[ 13.797060] tun: Universal TUN/TAP device driver, 1.6
[ 13.797084] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 13.803914] EDMA ver 1 hw init
[ 13.807396] EDMA HW Reset completed succesfully
[ 13.810227] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23)
[ 13.814637] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 13.822744] GMAC3(9ceebd00) Invalid MAC@ - using 02:14:0f:3e:d3:0e
[ 13.825274] GMAC4(9ceee500) Invalid MAC@ - using 6e:ec:23:7f:a3:98
[ 13.831684] GMAC5(9c9e0d00) Invalid MAC@ - using 3e:fc:04:b1:1c:cb
[ 13.837700] **********************************************************
[ 13.842756] * NSS Data Plane driver
[ 13.849298] **********************************************************
[ 13.854676] l2tp_core: L2TP core driver, V2.0
[ 13.859967] l2tp_netlink: L2TP netlink interface
[ 13.944139] qca-nss 39000000.nss: Direct firmware load for qca-nss0.bin failed with error -2
[ 13.944172] qca-nss 39000000.nss: Falling back to user helper
[ 14.388106] nss_driver - fw of size 728260 bytes copied to load addr: 40000000, nss_id : 0
[ 14.389285] Supported Frequencies -
[ 14.395269] 187.2 MHz 748.8 MHz
[ 14.401235] 1.4976 GHz <1>[ 14.402192]
[ 14.404688] node size 2 # items 4
[ 14.406017] memory: 40000000 536870912 (avl 425365504) items 4 active_cores 1
[ 14.409237] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[ 14.416362] 7f688180: NSS core 0 DDR from 40000000 to 41000000
[ 14.423190] 7f688180: meminfo init succeed
[ 14.444660] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[ 14.447001] gre: GRE over IPv4 demultiplexor driver
[ 14.452324] ip_gre: GRE over IPv4 tunneling driver
[ 14.465686] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 14.469067] node size 2 # items 4
[ 14.469269] Invalid macid 6
[ 14.474325] memory: 40000000 536870912 (avl 425365504) items 4 active_cores 1
[ 14.476933] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[ 14.484229] 7f688180: nss core 0 booted successfully
[ 14.496845] QCA multicast snooping installed successfully
[ 14.500697] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.511274] nf_conntrack version 0.5.0 (6159 buckets, 24636 max)
[ 15.484752] Netfilter messages via NETLINK v0.30.
[ 15.486240] ip_set: protocol 6
[ 15.967785] Not a bridge device, or device not found: br-
[ 18.777587] QCA Hy-Fi multicast installation successfully
[ 19.425813] PPP generic driver version 2.4.2
[ 19.614613] NET: Registered protocol family 24
[ 19.895576] :module loaded Build_ID - 06/29/21, 12:07:24 SoC=ipq60xx
[ 20.093797] cannot find nss-macsec0 node
[ 20.093845] cannot find nss-macsec1 node
[ 20.096841] cannot find nss-macsec2 node
[ 20.100689] nss_macsec init success
[ 22.374661] u32 classifier
[ 22.374678] input device check on
[ 22.376246] Actions configured
[ 22.744616] Mirror/redirect action on
[ 27.128420] fuse init (API version 7.23)
[ 27.527194] usbcore: registered new interface driver cdc_acm
[ 27.527219] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 27.532921] usbcore: registered new interface driver cdc_wdm
[ 27.544015] Ebtables v2.0 registered
[ 27.545889] Custom GPIO-based I2C driver version 0.1.1
[ 27.549587] i2c-gpio i2c-gpio.0: using pins 43 (SDA) and 42 (SCL)
[ 27.555535] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.561234] usbcore: registered new interface driver ipheth
[ 27.568478] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 27.648863] ctnetlink v0.93: registering with nfnetlink.
[ 27.650891] nf_conntrack_rtsp v0.6.21 loading
[ 27.866838] nf_nat_rtsp v0.6.21 loading
[ 27.870109] PPP MPPE Compression module registered
[ 27.871202] PPTP driver version 0.8.5
[ 27.882453] usbcore: registered new interface driver usbserial
[ 27.882515] usbcore: registered new interface driver usbserial_generic
[ 27.887231] usbserial: USB Serial support registered for generic
[ 27.932394] vmap allocation for size 167936 failed: use vmalloc= to increase size.
[ 27.934478] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information.
[ 27.939546] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 27.965133] xt_time: kernel timezone is -0000
[ 27.966429] usbcore: registered new interface driver cdc_ether
[ 27.970442] usbcore: registered new interface driver cdc_ncm
[ 27.974895] usbcore: registered new interface driver cp210x
[ 27.980051] usbserial: USB Serial support registered for cp210x
[ 27.987461] usbcore: registered new interface driver huawei_cdc_ncm
[ 28.002451] usbcore: registered new interface driver qmi_wwan
[ 28.003911] usbcore: registered new interface driver rndis_host
[ 28.009146] usbcore: registered new interface driver sierra
[ 28.012940] usbserial: USB Serial support registered for Sierra USB modem
[ 28.019673] usbcore: registered new interface driver sierra_net
[ 28.029725] usbcore: registered new interface driver option
[ 28.031173] usbserial: USB Serial support registered for GSM modem (1-port)
[ 32.457791] mem_manager: module license ‘unspecified’ taints kernel.
[ 32.457817] Disabling lock debugging due to kernel taint
[ 32.488510] qdf_dbg_mask value is invalid
[ 32.488530] Using the default module debug levels instead
[ 32.491492] qdf_print_ctrl_register: Allocated print control object 0
[ 32.496940]
[ 32.496940] MINIDUMP VA .bss start=7fb120c0 module=qdf
[ 35.392373] vmap allocation for size 2777088 failed: use vmalloc= to increase size.
[ 35.393576] vmap allocation for size 405504 failed: use vmalloc= to increase size.
[ 35.471520] wlan: [2178:E:CONFIG] cfg_uint_item_handler: 142: allow_mon_vaps_in_sr= - Invalid format (status 16); Using default 0
[ 35.471596] wlan: [2178:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50
[ 35.482252]
[ 35.482252] MINIDUMP VA .bss start=a0913640 module=umac
[ 36.122315] vmap allocation for size 1220608 failed: use vmalloc= to increase size.
[ 36.122885] vmap allocation for size 217088 failed: use vmalloc= to increase size.
[ 36.172512]
[ 36.172512] MINIDUMP VA .bss start=a2f071c0 module=qca_ol
[ 36.370753] vmap allocation for size 663552 failed: use vmalloc= to increase size.
[ 36.378922] wlan: [2227:I:ANY] =======ol_if_register_wifi3_0==========
[ 36.378922]
[ 36.378960] wlan: [2227:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:a09e28a0
[ 36.385845] remoteproc remoteproc1: powering up q6v5-m3
[ 36.398653] remoteproc remoteproc1: Booting fw image IPQ6018/m3_fw.mdt, size 6860
[ 36.402206] Sanity check passed for M3 image
[ 36.463906] remoteproc remoteproc1: remote processor q6v5-m3 is now up
[ 36.464043] : glink SUBSYS_BEFOER_POWERUP reinit done
[ 36.469326] wlan: [2227:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 2
[ 36.474809] remoteproc remoteproc0: powering up q6v5-wcss
[ 36.482098] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[ 36.487882] Sanity check passed for the image
[ 37.558363] glink_core_link_up glink is up
[ 37.558546] glink_xprt_open_event
[ 37.558630] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[ 37.558748] Subsystem error monitoring/handling services are up
[ 37.571195] remoteproc remoteproc0: remote processor q6v5-wcss is now up
[ 37.574414] cnss: QMI WLFW service connected, state: 0x1
[ 37.584195] wlan: [2227:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 3
[ 37.584350] cnss: device_id : 65533 mem mode : [0]
[ 37.585184] cnss: No board_id entry in device tree
[ 37.608675] cnss: BDF location : 0x4abc0000
[ 37.608696] cnss: BDF IPQ6018/bdwlan.bin size 65536
[ 37.611951] cnss: BDF download response , result: 0, err: 0x0
[ 37.616730] cnss: per device BDF location : 0x4abe0000
[ 37.622464] cnss: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000
[ 37.628665] cnss: BDF download response , result: 0, err: 0x0
[ 37.702421] wlan: [2227:I:ANY] pld_ahb_wlan_enable: 681: cnss_mode: Cold boot calibration
[ 37.931999] wlan: [2227:I:ANY] Coldboot calibration wait started
[ 37.931999]
[ 38.232052] wlan: [2227:I:ANY] Coldboot calibration wait ended
[ 38.232052]
[ 38.232748] wlan: [2227:I:ANY] ol_ath_do_cold_boot_calibration: 505: Coldboot calib successful: radio_id 0x65533
[ 38.239301] wlan: [2227:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)
[ 38.248710]
[ 38.248710] MINIDUMP VA .bss start=a09e2b80 module=wifi_3_0
[ 38.263347] wlan: [2244:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 0
[ 38.288728] remoteproc remoteproc0: stopped remote processor q6v5-wcss
[ 38.288874] glink_core_link_down glink is down
[ 38.294479] : glink SUBSYS_AFTER_SHUTDOWN cleanup done
[ 38.298580] wlan: [2244:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 1
[ 38.304185] remoteproc remoteproc1: stopped remote processor q6v5-m3
[ 38.324097] cnss: QMI WLFW service disconnected, state: 0x7
[ 38.363995] glink_xprt_close_event
[ 38.895499] vmap allocation for size 1220608 failed: use vmalloc= to increase size.
[ 38.896063] vmap allocation for size 217088 failed: use vmalloc= to increase size.
[ 38.937795]
[ 38.937795] MINIDUMP VA .bss start=a1b881c0 module=qca_ol
[ 39.076604] vmap allocation for size 663552 failed: use vmalloc= to increase size.
[ 39.083885] wlan: [2254:I:ANY] =======ol_if_register_wifi3_0==========
[ 39.083885]
[ 39.083932] wlan: [2254:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:a09e28a0
[ 39.091705] remoteproc remoteproc1: powering up q6v5-m3
[ 39.103209] remoteproc remoteproc1: Booting fw image IPQ6018/m3_fw.mdt, size 6860
[ 39.108069] Sanity check passed for M3 image
[ 39.116346] remoteproc remoteproc1: remote processor q6v5-m3 is now up
[ 39.120120] : glink SUBSYS_BEFOER_POWERUP reinit done
[ 39.126392] wlan: [2254:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 2
[ 39.131849] remoteproc remoteproc0: powering up q6v5-wcss
[ 39.139122] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[ 39.144935] Sanity check passed for the image
[ 39.451609] glink_core_link_up glink is up
[ 39.451769] glink_xprt_open_event
[ 39.451873] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[ 39.458023] Subsystem error monitoring/handling services are up
[ 39.464432] remoteproc remoteproc0: remote processor q6v5-wcss is now up
[ 39.465483] cnss: QMI WLFW service connected, state: 0x1
[ 39.465672] cnss: device_id : 65533 mem mode : [0]
[ 39.466353] cnss: No board_id entry in device tree
[ 39.466551] cnss: BDF location : 0x4abc0000
[ 39.466554] cnss: BDF IPQ6018/bdwlan.bin size 65536
[ 39.466812] cnss: BDF download response , result: 0, err: 0x0
[ 39.466954] cnss: per device BDF location : 0x4abe0000
[ 39.466986] cnss: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000
[ 39.468115] cnss: BDF download response , result: 0, err: 0x0
[ 39.518115] wlan: [2254:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 3
[ 39.524184] wlan: [2254:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode
[ 39.536738] wlan: [2254:I:ANY] qca_napi_create: 369: qca_napi_create: napi instance 0 created on pipe 4
[ 39.538873] wlan: [2254:I:ANY] __ol_ath_attach: 3520: Allocated soc 9a200500
[ 39.548094] wlan: [2254:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000
[ 39.555271] wlan: [2254:E:CONFIG] cfg_uint_item_handler: 171: dp_nss_comp_ring_size=4096 - Out of range [8192, 49152]; Using 8192
[ 39.566962] wlan: [2254:I:ANY] osif_nss_wifi_soc_setup: 189: nss register id -1 nss config 0 Target Type 19
[ 39.578323] wlan: [2254:I:ANY] __ol_ath_attach: 3746: dev name soc0
[ 39.588372] wlan: [2254:I:ANY] ol_ath_soc_attach: 7064: WMI attached. wmi_handle 9aa1a400
[ 39.594291] wlan: [2254:I:ANY] htc_wmi_init: 6358: htc_wmi_init() HT Create . 996c6000
[ 39.602518] wlan: [2254:I:ANY] htc_wmi_init: 6365: htc_wmi_init() Skipping BMI Done.
[ 39.610427] wlan: [2254:I:ANY] htc_wmi_init: 6422: [htc_wmi_init:6422] host_enable 0 nss_nwifi_offload 0
[ 39.621958] wlan: [2254:I:ANY] ol_target_init_complete: 6540: CDP soc attach success
[ 39.627880] wlan: [2254:I:ANY] ol_target_init_complete: 6547: Soc attach success NSS config 0
[ 39.635651] wlan: [2254:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 996c6000, ep 2, value 1
[ 39.644072] wlan: [2254:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 996c6000, ep 3, value 1
[ 39.653690] wlan: [2254:I:ANY] 1 Target failed service 0x106 connect request (status:1)
[ 39.653690]
[ 39.663294] wlan: [2254:E:WMI] Failed to connect to WMI CONTROL service status:27
[ 39.663294]
[ 39.673692] wlan: [114:I:TIF] init_deinit_populate_hw_mode_capability: 361: Preferred mode is not set, use mode id 1
[ 39.673692]
[ 39.681818] wlan: [114:I:TIF] HE_CAP Info = 1a08010d
[ 39.693851] wlan: [114:I:TIF] Num HW modes = 2
[ 39.698880] wlan: [114:I:TIF] Num PHY = 2
[ 39.703129] wlan: [114:I:TIF] Preferred HW Mode = 1 Num Radios = 2
[ 39.707222] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes,
[ 39.713296] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 0 wireless modes = 391f9001
[ 39.721933] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes,
[ 39.731097] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 1 wireless modes = 680680c
[ 39.739603] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 0 wireless modes = 0
[ 39.748954] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 1 wireless modes = 0
[ 39.758621] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 0 wireless modes = 0
[ 39.768463] wlan: [114:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 1 wireless modes = 0
[ 39.778490] wlan: [114:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 389: dfs_offload 1
[ 39.788046] wlan: [114:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1579: dfs->dfs_psoc_idx: 0
[ 39.797855] wlan: [114:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1585: dfs_soc_obj->num_dfs_privs: 1
[ 39.807796] wlan: [114:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 361: Do not allocate DFS object for 2G, pdev_id = 1
[ 39.868776] wlan: [114:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success
[ 39.883421] wlan: [114:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success
[ 39.983922] wlan: [114:I:ANY] copy_fw_abi_version_tlv: 6649: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[ 40.153450] wlan: [114:I:ANY] dp_peer_map_attach_wifi3: 8664: dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112
[ 40.153450]
[ 40.153729] wlan: [114:I:ANY] ready_extract_init_status_tlv: 8473: ready_extract_init_status_tlv:0
[ 40.164893] wlan: [2254:I:ANY] ol_ath_connect_htc: 1236: WMI is ready
[ 40.173935] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable
[ 40.180319] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable
[ 40.188836] wlan: [2254:I:ANY] ol_ath_soc_attach: 7151: connect HTC
[ 40.197409] wlan: [2254:I:ANY] ol_ath_soc_attach: 7152: bypasswmi : 0
[ 40.203567] wlan: [2254:E:WMI] event handler already registered 0x27001
[ 40.210171] wlan: [2254:E:WMI] event handler already registered 0x27002
[ 40.216597] wlan: [2254:E:WMI] event handler already registered 0x27003
[ 40.223198] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable
[ 40.229821] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable
[ 40.238477] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable
[ 40.246990] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable
[ 40.255579] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable
[ 40.264177] wlan: [2254:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable
[ 40.272667] wlan: [2254:I:ANY] ol_ath_soc_attach: 7232: ol_ath_soc_attach() UMAC attach .
[ 40.281248] wlan: [2254:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi0
[ 40.289353] wlan: [2254:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target
[ 40.296549] wlan: [2254:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default
[ 40.303996] wlan: [2254:I:ANY] ol_ath_pdev_attach: 8529: interface_id 0
[ 40.311475] wlan: [2254:I:TIF] ol_ath_pdev_regdmn_init: 7393: phy id = 0 Modes supported
[ 40.317906] wlan: [2254:I:TIF] ol_ath_pdev_regdmn_init: 7400: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[ 40.326242] wlan: [2254:I:TIF] ol_ath_pdev_regdmn_init: 7409: Reg cap - phy_id = 0 supp_bnd = 2, modes = 391f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100
[ 40.336490] wlan: [2254:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 391f9001 before update
[ 40.350803] wlan: [2254:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 391f9001 after update
[ 40.360526] wlan: [2254:I:ANY] ol_ath_update_ext_caps: 1916: 11ax 5G supported case
[ 40.370293] wlan: [2254:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[ 40.377692] wlan: [2254:I:ANY] ieee80211_cbs_init
[ 40.384211] wlan: [2254:I:ANY] CBS Inited
[ 40.384211]
[ 40.389089] wlan: [2254:I:ANY] acfg_attach: 3473: acfg_attach: 3473: Netlink socket created:9a01e400
[ 40.394559] wlan: [2254:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
[ 40.403835] wlan: [2254:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1
[ 40.414698] wlan: [2254:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
[ 40.421386] wlan: [0:I:ANY] ol_ath_pdev_attach: 8893: Set global_ic[1], ptr:a091396c
[ 40.428753] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(996eba04) Enabling DBDC Repeater 1
[ 40.436478] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(996eba04) is_primary 1
[ 40.444552] wlan: [2254:I:ANY] ol_ath_pdev_attach: 9022: Pdev = 0 Number of peers = 529
[ 40.453109] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14044: twt enabled.
[ 40.453109]
[ 40.453689] wlan: [2254:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
[ 40.453689]
[ 40.453694] wlan: [2254:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
[ 40.453694]
[ 40.453723] wlan: [2254:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 2099: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5
[ 40.453723]
[ 40.453749] wlan: [2254:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty
[ 40.453756] wlan: [2254:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 0 tx_desc_limit = 32768
[ 40.453773] wlan: [2254:I:ANY] osif_wrap_attach: 239: osif wrap attached
[ 40.453773]
[ 40.453778] wlan: [2254:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[ 40.453778]
[ 40.453784] wlan: [2254:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =9d8fa600 ic->ic_wrap_com=9d8fa600 &wrap_com->wc_devt=9d8fa600
[ 40.453784]
[ 40.453806] wlan: [2254:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60
[ 40.453855] wlan: [2254:I:ANY] wlan_cfg80211_init: 10915: Number of 5G channels: 25
[ 40.454122] wlan: [2254:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x987e0500, wdev: 0x987efc9c, wiphy: 0x9a199960, netdev: 0x987e0000
[ 40.454781] wlan: [2254:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi1
[ 40.454798] wlan: [2254:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target
[ 40.454803] wlan: [2254:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default
[ 40.454856] wlan: [2254:I:ANY] ol_ath_pdev_attach: 8529: interface_id 1
[ 40.454868] wlan: [2254:I:TIF] ol_ath_pdev_regdmn_init: 7393: phy id = 1 Modes supported
[ 40.454874] wlan: [2254:I:TIF] ol_ath_pdev_regdmn_init: 7400: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[ 40.454882] wlan: [2254:I:TIF] ol_ath_pdev_regdmn_init: 7409: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
[ 40.454887] wlan: [2254:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 680680c before update
[ 40.454892] wlan: [2254:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 680680c after update
[ 40.454897] wlan: [2254:I:ANY] ol_ath_update_ext_caps: 1924: 11ax 2G supported case
[ 40.455000] wlan: [2254:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[ 40.455076] wlan: [2254:I:ANY] ieee80211_cbs_init
[ 40.455079] wlan: [2254:I:ANY] CBS Inited
[ 40.455079]
[ 40.455091] wlan: [2254:I:ANY] acfg_attach: 3448: Offload using existing sock 9a01e400
[ 40.455101] wlan: [2254:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
[ 40.455106] wlan: [2254:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1
[ 40.455359] wlan: [2254:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11
[ 40.455382] wlan: [0:I:ANY] ol_ath_pdev_attach: 8893: Set global_ic[2], ptr:a091396c
[ 40.455389] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(996eb704) Enabling DBDC Repeater 1
[ 40.455396] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(996eb704) is_primary 0
[ 40.455404] wlan: [2254:I:ANY] ol_ath_pdev_attach: 9022: Pdev = 1 Number of peers = 529
[ 40.456216] wlan: [2254:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
[ 40.456216]
[ 40.456221] wlan: [2254:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
[ 40.456221]
[ 40.456245] wlan: [2254:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 2099: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5
[ 40.456245]
[ 40.456269] wlan: [2254:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty
[ 40.456276] wlan: [2254:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 1 tx_desc_limit = 32768
[ 40.456291] wlan: [2254:I:ANY] osif_wrap_attach: 239: osif wrap attached
[ 40.456291]
[ 40.456295] wlan: [2254:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[ 40.456295]
[ 40.456302] wlan: [2254:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =9db28a00 ic->ic_wrap_com=9db28a00 &wrap_com->wc_devt=9db28a00
[ 40.456302]
[ 40.456319] wlan: [2254:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60
[ 40.456336] wlan: [2254:I:ANY] wlan_cfg80211_init: 10903: Number of 2G channels: 11
[ 40.456497] wlan: [2254:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x98020500, wdev: 0x9802fc9c, wiphy: 0x9a19b960, netdev: 0x98020000
[ 40.457023] wlan: [2254:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: 3420: Running with HW mode = 1
[ 40.457355] wlan: [2254:E:QLD] qld_register: 108: Handle or address is NULL
[ 40.457369] wlan: [2254:I:ANY] wlan_pdev_operation: 744: num_radios=1, wifi_radios[0].sc = 987e0500_radio_type = 2
[ 40.457376] wlan: [2254:I:ANY] wlan_pdev_operation: 744: num_radios=2, wifi_radios[1].sc = 98020500_radio_type = 2
[ 40.457402] wlan: [2254:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)
[ 40.910585]

[K3rn3l_Ku5h]

2nd part
[ 40.910585]
[ 40.910585] MINIDUMP VA .bss start=a09e2b80 module=wifi_3_0
[ 40.910586] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14044: twt enabled.
[ 40.910586]
[ 41.038126] vmap allocation for size 569344 failed: use vmalloc= to increase size.
[ 41.050118] wlan: [2268:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a1c29018
[ 41.050160] wlan: [2268:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a1c29018
[ 41.060769] wlan: [2268:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss)
[ 44.648221] wlan: [2449:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 0
[ 44.648271] wlan: [2449:I:ANY] ol_ath_ahb_remove: 813: Suspending Target - with disable_intr set :soc0 (sc 9dbf8000) soc=9a200500
[ 44.654447] wlan: [2449:I:ANY] wlan_pdev_operation: 847: wlan_pdev_operation: disable_target_intr val is 1
[ 44.666235] wlan: [2449:I:ANY] wlan_pdev_operation: 847: wlan_pdev_operation: disable_target_intr val is 1
[ 44.675809] wlan: [2449:I:ANY] ol_ath_ahb_remove: 816: waiting for target paused event from target :soc0 (sc 9dbf8000)
[ 44.685400] wlan: [2449:I:ANY] ol_ath_ahb_remove: 834: AHB Call to nss detach
[ 44.696154] wlan: [2449:I:ANY] ol_ath_ahb_remove: 837: Call to nss detach ops 00000000
[ 44.703287] wlan: [2449:E:QLD] qld_register: 108: Handle or address is NULL
[ 44.711200] wlan: [2449:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached
[ 44.711200]
[ 44.718096] wlan: [2449:I:ANY] osif_wrap_detach: 271: osif wrap detached
[ 44.718096]
[ 44.728045] wlan: [2449:I:ANY] acfg_detach: 3500: acfg_detach Netlink socket released
[ 44.736214] wlan: [2449:E:CFR] tgt_cfr_deinit_pdev: 124: Error occurred with exit code 11
[ 44.736214]
[ 44.743698] wlan: [2449:E:CFR] cfr_deinitialize_pdev: 157: cfr_deinitialize_pdev status=11
[ 44.743698]
[ 44.753308] wlan: [0:I:ANY] ol_ath_pdev_detach: 9463: ol_ath_pdev_detach: remove global_ic[1]…gloabl_ic ptr:a091396c
[ 44.762892] wlan: [2449:I:ANY] ieee80211_cfg80211_radio_detach: 11042: ieee80211_cfg80211_radio_detach: ic: 0x987e0500, wdev: 0x987efc9c, netdev: 0x987e0000
[ 44.874124] PCIe: User of event deregistration is NULL
[ 44.924275] wlan: [2449:E:QLD] qld_register: 108: Handle or address is NULL
[ 44.924421] wlan: [2449:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached
[ 44.924421]
[ 44.930137] wlan: [2449:I:ANY] osif_wrap_detach: 271: osif wrap detached
[ 44.930137]
[ 44.940323] wlan: [2449:E:CFR] tgt_cfr_deinit_pdev: 124: Error occurred with exit code 11
[ 44.940323]
[ 44.947896] wlan: [2449:E:CFR] cfr_deinitialize_pdev: 157: cfr_deinitialize_pdev status=11
[ 44.947896]
[ 44.957504] wlan: [0:I:ANY] ol_ath_pdev_detach: 9463: ol_ath_pdev_detach: remove global_ic[0]…gloabl_ic ptr:a091396c
[ 44.967079] wlan: [2449:I:ANY] ieee80211_cfg80211_radio_detach: 11042: ieee80211_cfg80211_radio_detach: ic: 0x98020500, wdev: 0x9802fc9c, netdev: 0x98020000
[ 45.074204] PCIe: User of event deregistration is NULL
[ 45.164093] wlan: [2449:I:ANY] ath_lowi_if_netlink_delete: 121: ath_lowi_if_netlink_delete lowi_if_nl is NULL
[ 45.164167] wlan: [2449:I:ANY] ol_ath_phyerr_detach: 351: 6ol_ath_phyerr_detach: called
[ 45.173068] wlan: [2449:E:WMI] Event id 55 is unavailable
[ 45.181552] wlan: [2449:E:WMI] Event id 141 is unavailable
[ 45.186535] wlan: [2449:E:WMI] Event id 137 is unavailable
[ 45.324018] cnss: QMI WLFW service disconnected, state: 0x6
[ 45.324263] wlan: [2449:I:ANY] 6ath_ahb_remove
[ 45.324263]
[ 45.353780] remoteproc remoteproc0: stopped remote processor q6v5-wcss
[ 45.353911] glink_core_link_down glink is down
[ 45.359238] : glink SUBSYS_AFTER_SHUTDOWN cleanup done
[ 45.363691] wlan: [2449:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 1
[ 45.369152] remoteproc remoteproc1: stopped remote processor q6v5-m3
[ 45.394005] glink_xprt_close_event
[ 45.497665] wlan: [2522:E:QLD] qld_list_deinit: 63: Handle NULL
[ 45.497781] wlan: [2522:F:SER] wlan_serialization_deinit: 618: deregistered callbacks with obj mgr successfully
[ 45.775266] configuring additional NSS pbufs
[ 45.784369] additional pbufs of size 3100672 got added to NSS
[ 45.836430] qdf_dbg_mask value is invalid
[ 45.836452] Using the default module debug levels instead
[ 45.839412] qdf_print_ctrl_register: Allocated print control object 0
[ 45.844886]
[ 45.844886] MINIDUMP VA .bss start=7fd520c0 module=qdf
[ 48.336526] vmap allocation for size 2777088 failed: use vmalloc= to increase size.
[ 48.337772] vmap allocation for size 405504 failed: use vmalloc= to increase size.
[ 48.416271] wlan: [2573:E:CONFIG] cfg_uint_item_handler: 142: allow_mon_vaps_in_sr= - Invalid format (status 16); Using default 0
[ 48.416350] wlan: [2573:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50
[ 48.427003]
[ 48.427003] MINIDUMP VA .bss start=a0913640 module=umac
[ 48.933626] vmap allocation for size 1220608 failed: use vmalloc= to increase size.
[ 48.934230] vmap allocation for size 217088 failed: use vmalloc= to increase size.
[ 48.983717]
[ 48.983717] MINIDUMP VA .bss start=a2f071c0 module=qca_ol
[ 49.121267] vmap allocation for size 663552 failed: use vmalloc= to increase size.
[ 49.129357] wlan: [2610:I:ANY] =======ol_if_register_wifi3_0==========
[ 49.129357]
[ 49.129396] wlan: [2610:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:a09e28a0
[ 49.136363] remoteproc remoteproc1: powering up q6v5-m3
[ 49.147875] remoteproc remoteproc1: Booting fw image IPQ6018/m3_fw.mdt, size 6860
[ 49.152718] Sanity check passed for M3 image
[ 49.161008] remoteproc remoteproc1: remote processor q6v5-m3 is now up
[ 49.164798] : glink SUBSYS_BEFOER_POWERUP reinit done
[ 49.171039] wlan: [2610:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 2
[ 49.176523] remoteproc remoteproc0: powering up q6v5-wcss
[ 49.183770] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[ 49.189583] Sanity check passed for the image
[ 49.495831] glink_core_link_up glink is up
[ 49.496020] glink_xprt_open_event
[ 49.496108] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[ 49.498888] Subsystem error monitoring/handling services are up
[ 49.498943] remoteproc remoteproc0: remote processor q6v5-wcss is now up
[ 49.498988] wlan: [2610:I:ANY] ol_ath_ahb_ssr: 192: ol_ath_ahb_ssr: SSR event 3
[ 49.522160] cnss: QMI WLFW service connected, state: 0x1
[ 49.528481] cnss: device_id : 65533 mem mode : [0]
[ 49.534515] cnss: No board_id entry in device tree
[ 49.538578] cnss: BDF location : 0x4abc0000
[ 49.543173] cnss: BDF IPQ6018/bdwlan.bin size 65536
[ 49.547457] cnss: BDF download response , result: 0, err: 0x0
[ 49.552240] cnss: per device BDF location : 0x4abe0000
[ 49.558068] cnss: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000
[ 49.564158] cnss: BDF download response , result: 0, err: 0x0
[ 49.599195] wlan: [2610:I:ANY] pld_ahb_wlan_enable: 689: cnss_mode: Mission mode
[ 49.604822] wlan: [2610:I:ANY] qca_napi_create: 369: qca_napi_create: napi instance 0 created on pipe 4
[ 49.605809] wlan: [2610:I:ANY] __ol_ath_attach: 3520: Allocated soc 99600500
[ 49.615038] wlan: [2610:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000
[ 49.622193] wlan: [2610:E:CONFIG] cfg_uint_item_handler: 171: dp_nss_comp_ring_size=4096 - Out of range [8192, 49152]; Using 8192
[ 49.633900] wlan: [2610:I:ANY] osif_nss_wifi_soc_setup: 177: nss-wifili:#1 register wifili function for soc
[ 49.645251] wlan: [2610:I:ANY] osif_nss_wifi_soc_setup: 189: nss register id -1 nss config 3 Target Type 19
[ 49.655151] wlan: [2610:I:ANY] __ol_ath_attach: 3746: dev name soc0
[ 49.665116] wlan: [2610:I:ANY] ol_ath_soc_attach: 7064: WMI attached. wmi_handle 9a196200
[ 49.671020] wlan: [2610:I:ANY] htc_wmi_init: 6358: htc_wmi_init() HT Create . 929c3000
[ 49.679272] wlan: [2610:I:ANY] htc_wmi_init: 6365: htc_wmi_init() Skipping BMI Done.
[ 49.687169] wlan: [2610:I:ANY] htc_wmi_init: 6422: [htc_wmi_init:6422] host_enable 0 nss_nwifi_offload 0
[ 49.698110] wlan: [2610:I:ANY] ol_target_init_complete: 6540: CDP soc attach success
[ 49.704626] wlan: [2610:I:ANY] ol_target_init_complete: 6547: Soc attach success NSS config 0
[ 49.712385] wlan: [2610:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 929c3000, ep 2, value 1
[ 49.720812] wlan: [2610:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle 929c3000, ep 3, value 1
[ 49.731134] wlan: [2246:I:TIF] HE_CAP Info = 1a08010d
[ 49.740029] wlan: [2246:I:TIF] Num HW modes = 2
[ 49.745146] wlan: [2246:I:TIF] Num PHY = 2
[ 49.749481] wlan: [2246:I:TIF] Preferred HW Mode = 1 Num Radios = 2
[ 49.753652] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes,
[ 49.759827] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 0 wireless modes = 391f9001
[ 49.768506] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1440: Adding 11ax regulatory modes,
[ 49.777794] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1444: phy_id = 1 wireless modes = 680680c
[ 49.786389] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 0 wireless modes = 0
[ 49.795678] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 1 phy_id = 1 wireless modes = 0
[ 49.805574] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 0 wireless modes = 0
[ 49.815471] wlan: [2246:I:TIF] init_deinit_add_11ax_modes: 1467: hw_mode_id = 5 phy_id = 1 wireless modes = 0
[ 49.825605] wlan: [2246:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 389: dfs_offload 1
[ 49.835267] wlan: [2246:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1579: dfs->dfs_psoc_idx: 0
[ 49.845505] wlan: [2246:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1585: dfs_soc_obj->num_dfs_privs: 1
[ 49.855181] wlan: [2246:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 361: Do not allocate DFS object for 2G, pdev_id = 1
[ 49.873618] wlan: [2246:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success
[ 49.882840] wlan: [2246:I:TIF] init_deinit_update_pdev_tgt_info: 1082: CDP PDEV ATTACH success
[ 49.987350] wlan: [2246:I:ANY] copy_fw_abi_version_tlv: 6649: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[ 50.156813] wlan: [2246:I:ANY] dp_peer_map_attach_wifi3: 8664: dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112
[ 50.156813]
[ 50.157092] wlan: [2246:I:ANY] ready_extract_init_status_tlv: 8473: ready_extract_init_status_tlv:0
[ 50.168513] wlan: [2610:I:ANY] ol_ath_connect_htc: 1236: WMI is ready
[ 50.194055] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable
[ 50.194085] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable
[ 50.201572] wlan: [2610:I:ANY] ol_ath_soc_attach: 7151: connect HTC
[ 50.210176] wlan: [2610:I:ANY] ol_ath_soc_attach: 7152: bypasswmi : 0
[ 50.216319] wlan: [2610:E:WMI] event handler already registered 0x27001
[ 50.222905] wlan: [2610:E:WMI] event handler already registered 0x27002
[ 50.229337] wlan: [2610:E:WMI] event handler already registered 0x27003
[ 50.235937] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable
[ 50.242527] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable
[ 50.251215] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable
[ 50.259729] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable
[ 50.268317] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable
[ 50.276917] wlan: [2610:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable
[ 50.285418] wlan: [2610:I:ANY] ol_ath_soc_attach: 7232: ol_ath_soc_attach() UMAC attach .
[ 50.293994] wlan: [2610:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi0
[ 50.302084] wlan: [2610:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target
[ 50.309292] wlan: [2610:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default
[ 50.316731] wlan: [2610:I:ANY] ol_ath_pdev_attach: 8529: interface_id 0
[ 50.324226] wlan: [2610:I:TIF] ol_ath_pdev_regdmn_init: 7393: phy id = 0 Modes supported
[ 50.330637] wlan: [2610:I:TIF] ol_ath_pdev_regdmn_init: 7400: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[ 50.338983] wlan: [2610:I:TIF] ol_ath_pdev_regdmn_init: 7409: Reg cap - phy_id = 0 supp_bnd = 2, modes = 391f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100
[ 50.349232] wlan: [2610:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 391f9001 before update
[ 50.363573] wlan: [2610:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 391f9001 after update
[ 50.373278] wlan: [2610:I:ANY] ol_ath_update_ext_caps: 1916: 11ax 5G supported case
[ 50.383066] wlan: [2610:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[ 50.390438] wlan: [2610:I:ANY] ieee80211_cbs_init
[ 50.396958] wlan: [2610:I:ANY] CBS Inited
[ 50.396958]
[ 50.401833] wlan: [2610:I:ANY] acfg_attach: 3473: acfg_attach: 3473: Netlink socket created:9d7f5c00
[ 50.407303] wlan: [2610:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
[ 50.416589] wlan: [2610:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1
[ 50.427449] wlan: [2610:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
[ 50.434143] wlan: [0:I:ANY] ol_ath_pdev_attach: 8893: Set global_ic[1], ptr:a091396c
[ 50.441486] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(996ded04) Enabling DBDC Repeater 1
[ 50.449245] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(996ded04) is_primary 1
[ 50.449295] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[ 50.465634] wlan: [2610:I:ANY] ol_ath_pdev_attach: 9022: Pdev = 0 Number of peers = 529
[ 50.474186] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14044: twt enabled.
[ 50.474186]
[ 50.474818] wlan: [2610:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
[ 50.474818]
[ 50.474823] wlan: [2610:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
[ 50.474823]
[ 50.474849] wlan: [2610:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 2099: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5
[ 50.474849]
[ 50.474875] wlan: [2610:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty
[ 50.474882] wlan: [2610:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 0 tx_desc_limit = 4096
[ 50.474902] wlan: [2610:I:ANY] osif_wrap_attach: 239: osif wrap attached
[ 50.474902]
[ 50.474907] wlan: [2610:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[ 50.474907]
[ 50.474914] wlan: [2610:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =93898600 ic->ic_wrap_com=93898600 &wrap_com->wc_devt=93898600
[ 50.474914]
[ 50.474936] wlan: [2610:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60
[ 50.474942] wlan: [2610:I:ANY] ol_ath_enable_fraglist: 3010: Enabled Fraglist bit for the radio wifi0 features 41
[ 50.474991] wlan: [2610:I:ANY] wlan_cfg80211_init: 10915: Number of 5G channels: 25
[ 50.475242] wlan: [2610:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x9a1c0500, wdev: 0x9a1cfc9c, wiphy: 0x93895160, netdev: 0x9a1c0000
[ 50.475889] wlan: [2610:I:ANY] __ol_ath_attach: 3862: pdev_netdev name wifi1
[ 50.475908] wlan: [2610:I:ANY] __ol_ath_attach: 3908: Skip txrx_pdev_attach_target
[ 50.475913] wlan: [2610:I:ANY] __ol_ath_attach: 3933: BURSTING enabled by default
[ 50.475968] wlan: [2610:I:ANY] ol_ath_pdev_attach: 8529: interface_id 1
[ 50.475980] wlan: [2610:I:TIF] ol_ath_pdev_regdmn_init: 7393: phy id = 1 Modes supported
[ 50.475986] wlan: [2610:I:TIF] ol_ath_pdev_regdmn_init: 7400: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[ 50.475994] wlan: [2610:I:TIF] ol_ath_pdev_regdmn_init: 7409: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
[ 50.475999] wlan: [2610:I:ANY] ol_ath_update_wireless_modes: 1351: wireless_modes = 680680c before update
[ 50.476005] wlan: [2610:I:ANY] ol_ath_update_wireless_modes: 1366: Wireless_modes = 680680c after update
[ 50.476010] wlan: [2610:I:ANY] ol_ath_update_ext_caps: 1924: 11ax 2G supported case
[ 50.476117] wlan: [2610:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[ 50.476189] wlan: [2610:I:ANY] ieee80211_cbs_init
[ 50.476192] wlan: [2610:I:ANY] CBS Inited
[ 50.476192]
[ 50.476204] wlan: [2610:I:ANY] acfg_attach: 3448: Offload using existing sock 9d7f5c00
[ 50.476213] wlan: [2610:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
[ 50.476218] wlan: [2610:I:ANY] ol_ath_stats_attach: 2134: periodic_chan_stats: 1
[ 50.476472] wlan: [2610:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11
[ 50.476496] wlan: [0:I:ANY] ol_ath_pdev_attach: 8893: Set global_ic[2], ptr:a091396c
[ 50.476502] wlan: [0:I:ANY] dp_lag_soc_enable: 91: pdev(996de004) Enabling DBDC Repeater 1
[ 50.476525] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(996de004) is_primary 0
[ 50.476539] wlan: [2610:I:ANY] ol_ath_pdev_attach: 9022: Pdev = 1 Number of peers = 529
[ 50.477356] wlan: [2610:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
[ 50.477356]
[ 50.477361] wlan: [2610:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
[ 50.477361]
[ 50.477384] wlan: [2610:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: 2099: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 1, REO dest ring = 5
[ 50.477384]
[ 50.477408] wlan: [2610:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 560: cfg block channel list is empty
[ 50.477414] wlan: [2610:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3451: pdev_idx = 1 tx_desc_limit = 4096
[ 50.477429] wlan: [2610:I:ANY] osif_wrap_attach: 239: osif wrap attached
[ 50.477429]
[ 50.477433] wlan: [2610:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[ 50.477433]
[ 50.477440] wlan: [2610:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =93899c00 ic->ic_wrap_com=93899c00 &wrap_com->wc_devt=93899c00
[ 50.477440]
[ 50.477457] wlan: [2610:I:ANY] __ol_ath_attach: 4114: needed_headroom reservation 60
[ 50.477463] wlan: [2610:I:ANY] ol_ath_enable_fraglist: 3010: Enabled Fraglist bit for the radio wifi1 features 41
[ 50.477481] wlan: [2610:I:ANY] wlan_cfg80211_init: 10903: Number of 2G channels: 11
[ 50.477654] wlan: [2610:I:ANY] ieee80211_cfg80211_radio_attach: 11009: ic: 0x9a1a0500, wdev: 0x9a1afc9c, wiphy: 0x93897160, netdev: 0x9a1a0000
[ 50.478179] wlan: [2610:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: 3420: Running with HW mode = 1
[ 50.478517] wlan: [2610:E:QLD] qld_register: 108: Handle or address is NULL
[ 50.478531] wlan: [2610:I:ANY] wlan_pdev_operation: 744: num_radios=1, wifi_radios[0].sc = 9a1c0500_radio_type = 2
[ 50.478538] wlan: [2610:I:ANY] wlan_pdev_operation: 744: num_radios=2, wifi_radios[1].sc = 9a1a0500_radio_type = 2
[ 50.478561] wlan: [2610:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)
[ 50.951526]
[ 50.951526] MINIDUMP VA .bss start=a09e2b80 module=wifi_3_0
[ 50.951527] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[ 50.967495] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 14044: twt enabled.

[K3rn3l_Ku5h]

3rd Part
[ 50.967495]
[ 51.064282] vmap allocation for size 569344 failed: use vmalloc= to increase size.
[ 51.077434] wlan: [2624:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a1b20018
[ 51.077475] wlan: [2624:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:a1b20018
[ 51.088115] wlan: [2624:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss)
[ 56.641161] vmap allocation for size 839680 failed: use vmalloc= to increase size.
[ 56.672603] ECM init
[ 56.672658] ECM database jhash random seed: 0x438343d5
[ 56.685006] ECM init complete
[ 57.130387] gpio-0 (sysfs): gpiod_request: status -16
[ 57.130402] export_store: status -16
[ 57.580692] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 57.599225] Not a bridge device, or device not found: br-lan
[ 57.605379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 57.636276] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 57.641862] device eth1 entered promiscuous mode
[ 57.643628] br-lan: port 1(eth1) entered forwarding state
[ 57.645836] br-lan: port 1(eth1) entered forwarding state
[ 57.657229] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 57.665921] device eth2 entered promiscuous mode
[ 57.666004] br-lan: port 2(eth2) entered forwarding state
[ 57.669610] br-lan: port 2(eth2) entered forwarding state
[ 57.677248] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 57.684973] device eth3 entered promiscuous mode
[ 57.686122] br-lan: port 3(eth3) entered forwarding state
[ 57.690821] br-lan: port 3(eth3) entered forwarding state
[ 57.701789] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 57.711744] device eth4 entered promiscuous mode
[ 57.711842] br-lan: port 4(eth4) entered forwarding state
[ 57.715495] br-lan: port 4(eth4) entered forwarding state
[ 57.731924] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 57.974419] eth0: PHY Link up speed: 1000
[ 57.974757] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 58.366980] __mc_netlink_receive: Disable bridge snooping!
[ 58.634096] br-lan: port 1(eth1) entered disabled state
[ 58.634420] br-lan: port 2(eth2) entered disabled state
[ 58.638411] br-lan: port 3(eth3) entered disabled state
[ 58.643699] br-lan: port 4(eth4) entered disabled state
[ 59.768178] __mc_netlink_receive: Disable bridge snooping!
[ 60.144516] __mc_netlink_receive: Enable bridge snooping!
[ 60.495156] wlan: [5130:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
[ 60.496037] wlan: [5130:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
[ 60.501752] wlan: [5130:I:ANY] number of channels: 2G = 0 5G = 25
[ 60.509497] wlan: [5130:I:ANY] wlan_cfg80211_set_country: 6081: wlan_cfg80211_set_country: Country: US ret: 0
[ 60.515137] wlan: [4421:I:ANY] ol_acfg_handle_wifi_ioctl: 417: ol_acfg_handle_wifi_ioctl: req->cmd=75 not valid for radio interface, it’s for VAP
[ 60.809146] wlan: [5231:I:ANY] wlan_cfg80211_set_hwaddr: 6154: wlan_cfg80211_set_hwaddr :94:83:c4:12:15:cd ret: 0
[ 60.851700] wlan: [5238:I:ANY] ol_ath_set_config_param: 1577: set TXBF_SND_PERIOD: value 100 wmi_status 0
[ 60.995799] wlan: [0:I:ANY] ol_ath_set_config_param: 2328: Disconnect_timeout value: 10
[ 61.039396] wlan: [0:I:ANY] ol_ath_set_config_param: 2334: Reconfiguration_timeout value:60
[ 62.276255] wlan: [5902:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11
[ 62.276337] wlan: [5902:I:ANY] number of channels: 2G = 11 5G = 0
[ 62.282716] wlan: [5902:I:ANY] wlan_cfg80211_set_country: 6081: wlan_cfg80211_set_country: Country: US ret: 0
[ 62.564132] wlan: [5957:I:ANY] wlan_cfg80211_set_hwaddr: 6154: wlan_cfg80211_set_hwaddr :94:83:c4:12:15:ce ret: 0
[ 62.646552] wlan: [5965:I:ANY] ol_ath_set_config_param: 1577: set TXBF_SND_PERIOD: value 100 wmi_status 0
[ 62.814530] wlan: [0:I:ANY] ol_ath_set_config_param: 2328: Disconnect_timeout value: 10
[ 62.855707] wlan: [0:I:ANY] ol_ath_set_config_param: 2334: Reconfiguration_timeout value:60
[ 63.521958] coresight-tmc 6048000.tmc: TMC enabled
[ 63.521993] coresight-replicator-qcom 6046000.replicator: REPLICATOR enabled
[ 63.525695] coresight-tmc 6047000.tmc: TMC enabled
[ 63.532846] coresight-funnel 6041000.funnel: FUNNEL inport 7 enabled
[ 63.537519] coresight-stm 6002000.stm: STM tracing enabled
[ 281.974334] eth0: PHY Link is down
[ 348.974665] eth2: PHY Link up speed: 10
[ 348.974956] br-lan: port 2(eth2) entered forwarding state
[ 348.977352] br-lan: port 2(eth2) entered forwarding state
[ 350.973992] br-lan: port 2(eth2) entered forwarding state
[ 350.974525] eth2: PHY Link is down
[ 350.978916] br-lan: port 2(eth2) entered disabled state
[ 352.974737] eth2: PHY Link up speed: 1000
[ 352.974814] br-lan: port 2(eth2) entered forwarding state
[ 352.977769] br-lan: port 2(eth2) entered forwarding state
[ 354.973995] br-lan: port 2(eth2) entered forwarding state
[ 686.804694] br-lan: port 2(eth2) entered disabled state
[ 686.810367] device eth1 left promiscuous mode
[ 686.810526] br-lan: port 1(eth1) entered disabled state
[ 686.821244] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 686.823498] device eth2 left promiscuous mode
[ 686.826170] br-lan: port 2(eth2) entered disabled state
[ 686.837906] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 686.840053] device eth3 left promiscuous mode
[ 686.842722] br-lan: port 3(eth3) entered disabled state
[ 686.855262] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 686.857540] device eth4 left promiscuous mode
[ 686.860485] br-lan: port 4(eth4) entered disabled state
[ 686.873318] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 688.732046] Not a bridge device, or device not found: br-lan
[ 688.762708] device eth1 entered promiscuous mode
[ 688.778928] device eth2 entered promiscuous mode
[ 688.788095] device eth3 entered promiscuous mode
[ 688.800068] device eth4 entered promiscuous mode
[ 688.812272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 688.971071] __mc_netlink_receive: Disable bridge snooping!
[ 689.260863] __mc_netlink_receive: Enable bridge snooping!
[ 689.333459] __mc_netlink_receive: Disable bridge snooping!
[ 690.680195] wlan: [20645:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
[ 690.681145] wlan: [20645:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
[ 690.686945] wlan: [20645:I:ANY] number of channels: 2G = 0 5G = 25
[ 690.694234] wlan: [20645:I:ANY] wlan_cfg80211_set_country: 6081: wlan_cfg80211_set_country: Country: US ret: 0
[ 690.700241] wlan: [20195:I:ANY] ol_acfg_handle_wifi_ioctl: 417: ol_acfg_handle_wifi_ioctl: req->cmd=75 not valid for radio interface, it’s for VAP
[ 690.932855] wlan: [20762:I:ANY] wlan_cfg80211_set_hwaddr: 6154: wlan_cfg80211_set_hwaddr :94:83:c4:12:15:cd ret: -16
[ 690.972417] wlan: [20783:I:ANY] ol_ath_set_config_param: 1577: set TXBF_SND_PERIOD: value 100 wmi_status 0
[ 691.094551] wlan: [0:I:ANY] ol_ath_set_config_param: 2328: Disconnect_timeout value: 10
[ 691.137211] wlan: [0:I:ANY] ol_ath_set_config_param: 2334: Reconfiguration_timeout value:60
[ 691.536973] wlan: [20946:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath0 : clone params: 0x00000001
[ 691.537040] wlan: [20946:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create 94:83:c4:12:15:cd
[ 691.548134] wlan: [20946:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation
[ 691.556362] wlan: [20946:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x9a1c0500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[ 691.556362]
[ 691.566031] wlan: [20946:I:ANY] ol_ath_vap_set_param: 1121: Setting SGI value: 1
[ 691.577594] wlan: [20946:I:ANY] ol_ath_vap_set_param: 2149: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0
[ 691.585032] wlan: [20946:I:ANY] ol_ath_vap_set_param: 2159: he_bf_cap=0x3b
[ 691.598670] wlan: [20946:I:ANY] ol_ath_vap_set_param: 2174: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[ 691.605387] wlan: [20946:I:ANY] MBO Initialized
[ 691.619444] wlan: [20946:I:ANY] OCE Initialized
[ 691.623826] wlan: [20946:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 32 nss_id -1
[ 691.628366] wlan: [20946:I:ANY] NSS radio_if 28
[ 691.638460] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0
[ 691.642502] wlan: [20946:I:ANY] osif_nss_ol_vap_create: 1376: vap create 940c6500 : if_num 32
[ 691.650841] wlan: [20946:I:ANY] wlan_vap_create: 1636: exit
[ 691.659504] wlan: [20946:E:ANY] Smart Antenna is not supported
[ 691.665201] wlan: [20946:E:ANY] Smart Antenna is not supported
[ 691.670879] wlan: [20946:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0
[ 691.676705] wlan: [20946:I:ANY] WLAN-NSS: VAP NSS ops initialized
[ 691.687086] wlan: [20946:I:ANY] VAP device ath0 created osifp: (940c6500) os_if: (940d0000)
[ 691.974100] eth2: PHY Link up speed: 1000
[ 691.974753] br-lan: port 2(eth2) entered forwarding state
[ 691.977134] br-lan: port 2(eth2) entered forwarding state
[ 692.575973] 8021q: adding VLAN 0 to HW filter on device ath0
[ 692.583456] device ath0 entered promiscuous mode
[ 692.583550] br-lan: port 5(ath0) entered forwarding state
[ 692.587176] br-lan: port 5(ath0) entered forwarding state
[ 692.593362] wlan: [3438:I:ANY] wlan_cfg80211_do_acs: 3497: vap-0(ath0):ACS Params
[ 692.597849] wlan: [3438:I:ANY] wlan_cfg80211_do_acs: 3500: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:30|chwidth:20|
[ 692.605315] wlan: [3438:I:ANY] ieee80211_autoselect_infra_bss_channel: 3995: ACS started: vap:0x940d0000
[ 693.354703] wlan: [21369:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11
[ 693.354796] wlan: [21369:I:ANY] number of channels: 2G = 11 5G = 0
[ 693.361197] wlan: [21369:I:ANY] wlan_cfg80211_set_country: 6081: wlan_cfg80211_set_country: Country: US ret: 0
[ 693.569441] wlan: [21383:I:ANY] wlan_cfg80211_set_hwaddr: 6154: wlan_cfg80211_set_hwaddr :94:83:c4:12:15:ce ret: -16
[ 693.606841] wlan: [21385:I:ANY] ol_ath_set_config_param: 1577: set TXBF_SND_PERIOD: value 100 wmi_status 0
[ 693.720442] wlan: [0:I:ANY] ol_ath_set_config_param: 2328: Disconnect_timeout value: 10
[ 693.745555] __mc_netlink_receive: Disable bridge snooping!
[ 693.764840] wlan: [0:I:ANY] ol_ath_set_config_param: 2334: Reconfiguration_timeout value:60
[ 693.938196] __mc_netlink_receive: Enable bridge snooping!
[ 693.974025] br-lan: port 2(eth2) entered forwarding state
[ 694.063124] wlan: [21510:I:ANY] wlan_cfg80211_add_virtual_intf: 325: proprietary mode 6 for interface: ath1 : clone params: 0x00000001
[ 694.063191] wlan: [21510:I:ANY] osifp_create_wlan_vap: 10411: VDEV Create 94:83:c4:12:15:ce
[ 694.074367] wlan: [21510:E:CMN_MLME] mlme_vdev_ext_obj_create: 1389: VDEV MLME obj is creation
[ 694.082445] wlan: [21510:I:ANY] wlan_vap_create: 1603: enter. devhandle=0x9a1a0500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[ 694.082445]
[ 694.091576] wlan: [21510:I:ANY] ol_ath_vap_set_param: 1121: Setting SGI value: 1
[ 694.103695] wlan: [21510:I:ANY] ol_ath_vap_set_param: 2149: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0
[ 694.111194] wlan: [21510:I:ANY] ol_ath_vap_set_param: 2159: he_bf_cap=0x3b
[ 694.124749] wlan: [21510:I:ANY] ol_ath_vap_set_param: 2174: VDEV params:AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[ 694.131446] wlan: [21510:I:ANY] MBO Initialized
[ 694.145552] wlan: [21510:I:ANY] OCE Initialized
[ 694.150055] wlan: [21510:I:ANY] osif_nss_ol_vap_create: 1268: NSS wifi offload VAP create IF 33 nss_id -1
[ 694.154509] wlan: [21510:I:ANY] NSS radio_if 29
[ 694.164717] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1020: VDEV configuration success: 0
[ 694.168645] wlan: [21510:I:ANY] osif_nss_ol_vap_create: 1376: vap create 940f6500 : if_num 33
[ 694.176995] wlan: [21510:I:ANY] wlan_vap_create: 1636: exit
[ 694.185656] wlan: [21510:E:ANY] Smart Antenna is not supported
[ 694.191349] wlan: [21510:E:ANY] Smart Antenna is not supported
[ 694.197040] wlan: [21510:I:ANY] osif_create_vap_complete: 10609: TX Checksum:1|SG:1|TSO:1|LRO:0
[ 694.202838] wlan: [21510:I:ANY] WLAN-NSS: VAP NSS ops initialized
[ 694.213241] wlan: [21510:I:ANY] VAP device ath1 created osifp: (940f6500) os_if: (94158000)
[ 694.583979] br-lan: port 5(ath0) entered forwarding state
[ 695.063661] 8021q: adding VLAN 0 to HW filter on device ath1
[ 695.070232] device ath1 entered promiscuous mode
[ 695.070327] br-lan: port 6(ath1) entered forwarding state
[ 695.073927] br-lan: port 6(ath1) entered forwarding state
[ 695.079988] wlan: [3438:I:ANY] wlan_cfg80211_do_acs: 3497: vap-1(ath1):ACS Params
[ 695.084619] wlan: [3438:I:ANY] wlan_cfg80211_do_acs: 3500: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20|
[ 695.092068] wlan: [3438:I:ANY] ieee80211_autoselect_infra_bss_channel: 3995: ACS started: vap:0x94158000
[ 695.603858] cnss: Ignore double allocation for QDSS trace, current len 1
[ 696.273539] __mc_netlink_receive: Disable bridge snooping!
[ 696.446636] __mc_netlink_receive: Enable bridge snooping!
[ 697.063973] br-lan: port 6(ath1) entered forwarding state
[ 698.489142] wlan: [2586:I:ANY] vap-1(ath1): ACS result PCH 1, SCH 5, hw_mode 1 chwidth 40, vht_seg0 3, vht_seg1 0
[ 698.489196] wlan: [2586:I:ANY] ieee80211_acs_scan_evhandler: 3732: lock held duration: 1(ms)
[ 698.508386] wlan: [3438:I:ANY] DES SSID SET=GL-AX1800
[ 698.508413] wlan: [3438:I:ANY] wlan_cfg80211_chan_to_phymode: 1235: wlan_cfg80211_chan_to_phymode: band:0 width: 2 channel_cfreq: 2412 center_freq1: 2422 chandef.center_freq2: 0 flags: 0
[ 698.574146] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:1
[ 698.574425] wlan: [0:E:ANY] Smart Antenna is not supported
[ 698.578208] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps)
[ 698.583501] wlan: [0:I:ANY] vdev[1]: Mgt Rate:1000(kbps)
[ 700.313389] wlan: [2586:I:ANY] vap-0(ath0): ACS result PCH 44, SCH 36, hw_mode 2 chwidth 80, vht_seg0 42, vht_seg1 0
[ 700.313461] wlan: [2586:I:ANY] ieee80211_acs_scan_evhandler: 3732: lock held duration: 0(ms)
[ 700.339720] wlan: [3438:I:ANY] DES SSID SET=GL-AX1800
[ 700.339748] wlan: [3438:I:ANY] wlan_cfg80211_set_phymode: 1211: desired hw mode: 30
[ 700.442291] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:44
[ 700.442645] wlan: [0:E:WMI] event handler already registered 0x2a001
[ 700.446345] wlan: [0:E:ANY] Smart Antenna is not supported
[ 700.452781] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps)
[ 700.458090] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps)
root@GL-AX1800:~# cat /etc/glversion
3.206
root@GL-AX1800:~#

[K3rn3l_Ku5h]

Sorry alzhoa could you explain Flash back and force. Not seeing it on the uboot page. I also don’t every keep settings or packages when I upgrade the firmware. Also have tried 192.168.8.1/index(loads the tab that says GL.iNet admin finishes loading but blank page) and 192.168.8.1/cgi-bin/luci returns a error message

[Blobbie01]

Try flashing the custom openwrt. That should atleast make it possible to access the admin panel. When you have done that, flash the official GL firmware through LuCi

[K3rn3l_Ku5h]

Flashed the custom Openwrt using Uboot. Went to 192.168.1.1 GL.iNet UI opened immediately logged in with password that was set up using Bluetooth and app and was in and loaded luCi updated to firmware 3.214. Default Gateway is 192.168.8.1 Everything seems to work, not sure how. Sense its working now time to break it again what is procedure should I use to upgrade to 4.x snapshot and back to 3.x stable builds?

[Blobbie01]

To upgrade to V4: uboot

To downgrade to V3: LuCi

[hansome]

To upgrade to 4.x, uboot web/ GL.iNetUI both work, with nand-factory.img. (not sysupgrade.tar)
To downgrade to 3.x, only uboot web works, with factory release 3.x .img.

3.x doesn’t have luci installed, so when access http://192.168.8.1/cgi-bin/luci

/usr/lib/lua/luci/dispatcher.lua:255: No valid theme found

This error occurs.

To avoid any cached content in case of your browser,

disable cache or use incognito window should solve it.