Flint 2 - 10Mbps - slow ethernet/wifi speeds

[zemonkey]

Hi Guys,

I am getting less than 10 Mbps download/upload speeds on ethernet and wifi when using the Flint 2 router. When i am connected to my ISP modem (which also acts as a router if its not on bridge mode) I would be getting over 700 Mbps. This means that the issue is clearly not from a cable or from the ISP, but rather something to do with the Flint 2 router settings or hardware. Any help would be greatly appreciated.

Some extra information:

-I bought a new Flint 2 router and have it connected to my ISP modem ( The modem is in bridge mode and is connected to the Flint 2 Router through the WAN port).
-I am running the latest firmware (v4.7.0)

Do I need to return this router? 10Mbps is ridiculous

[admon]

Please run the speedtest directly on your router to rule out your client system:

GL-MT6000 Slow Upload speed

Please do a test directly from the router itself. Via SSH: wget https://install.speedtest.net/app/cli/ookla-speedtest-1.2.0-linux-aarch64.tgz && tar xzf ookla -speedtest-1.2.0-linux-aarch64.tgz && ./speedtest

[raphamotta]

I had this issue and I updated to the latest beta firmware 4.7.4 and it solves the issue. Try it

[zemonkey]

I upgraded the device to firmware 4.7.4 and rebooted the router. Now its fixed! Thanks alot for your help, and thank you for not replying redundant solutions.