Flint 2 lan2>wan2

[will.qiu]

So in practice, you’re looking to have three wired WAN connections.

This isn’t currently supported through the GL UI, but it can be achieved in LuCI by assigning LAN2 to WAN3, please refer to:

WAN2 on Flint2

It would be nice if it was possible to select one of the 1Gbit ports for Ethernet2/Ethernet WAN2 on the Flint2 so that the 2.5G lan port can still be used. This would be handy if you have a fast primary wan but a slower than 1Gbit/s secondary.