Flint 3 - no secondary wifi after fw update

[Arcu66]

Hi there,

Same thing happened to me after upgrading from 4.8.3 to 4.8.4. Main WiFi works as expected but IoT network configured using this guide

How to set up the VLAN for IoT Wi-Fi on Flint 3(GL-BE9300)

For Flint3 (GL-BE9300) only. Describes how to configure a dedicated IoT network on SSH by creating a VLAN (VID 25), a bridge, DHCP, firewall rules, and a separate 2.4 GHz Wi-Fi SSID. 1. Define VLAN 25 on eth1 We create a VLAN subinterface eth1.25 using IEEE 802.1Q tagging. uci set network.eth1_25=device uci set network.eth1_25.type='8021q' uci set network.eth1_25.ifname='eth1' uci set network.eth1_25.vid='25' uci set network.eth1_25.name='eth1.25' 2. Create the IoT Bridge We define a new b…

will not broadcast anymore. The VLANs still work and otherwise everything is okay.

Also, the entries in /etc/config/wireless for this secondary wifi are still there, so I suppose that’s not the problem. Please keep us posted if staff can help you out!