FLINT2 - Problems with 2.5gbit between branch 21.02 and 24.10

Spx_19 · January 4, 2025, 11:53am

Good Morning,
I'm experiencing some problems with GL-iNet openwrt 24.10 branch. Seems that the speediest chop around a gigabit, for example first 2 images are with 21.02, as you can see the Speed is around 2.1gbit:

but if I install 24.10 reconfiguring settings from scratch:

As you can see, there are 900mbit of difference.

Can you have an explanation for this? It can be fixed?

Any ideas?

Renato · January 4, 2025, 1:04pm

Is this the official 4.7.0-op24?

Spx_19 · January 4, 2025, 1:55pm

Yes, absolutely. Nothing custom or simular. Official fw, installed, Speedtest installed and checked

MrZedS · January 4, 2025, 3:05pm

Here with 2,5 Gbit Tim and 4.7.0-op24 Beta 2024-12-09 Flint2 Firmware

Renato · January 4, 2025, 3:16pm

Are you using the WAN port or WAN/LAN1?

Try switching between these two

Spx_19 · January 4, 2025, 4:37pm

You're on Wan or Wan/Lan1?

Spx_19 · January 4, 2025, 4:37pm

I've tried, but nothing. Same result. Stucked on 1.3gbit

Pro4TLZZ · January 4, 2025, 6:40pm

have you checked the setting of hardware acceleration between the 2 firmware branches?

Spx_19 · January 4, 2025, 7:49pm

It’s the same between the 2 branches, hardware acceleration on.

Spx_19 · January 5, 2025, 7:59am

You’re using network acceleration setting?

MrZedS · January 5, 2025, 9:24am

Wan on ONT
Wan1/Lan on pc with 2,5 Gbit Realtek card (Realtek Gaming 2.5GbE Family Controller)

MrZedS · January 5, 2025, 9:25am

Hardware Acceleration ON

Spx_19 · January 5, 2025, 10:03am

Thanks. I’m doing Speedtest directly from the router, so it’s much stranger…