From 4.8.0op24 to openwrt 24.10.2

[9b9e69c2-4b75-4420]

If 4.8.0op24 contains the GL GUI I'll say no. No doubt their custom routing/firewall scripts & nonstandard configuration files are going to cause havoc with pure OWRT. Related:

Issue with Policy-Based Routing not overriding NordVPN default route

Hello GL.iNet Support, I’m experiencing an issue with Policy-Based Routing (PBR) on my Flint 3 router. Here is my setup: The router has a NordVPN client connected via OpenVPN. Several WireGuard clients connect to the Flint 3 router (WG server) using the 10.0.0.0/24 subnet. The LAN is on 192.168.2.0/24. Via the gl-inet UI, I have configured the VPN policy to filter by MAC address. I don't want to exclude based on website or IP addresses or ranges. It is not possible, by default, to create a po…

I would pull the existing conf via LuCI. The resulting tarball is just a collection of UTF-8/LF text files so you could still extract the relevant details. Related:

MT-3000 Firmware 4.8.1 Wireguard Server

Here, I think you'll want to use this thirty day trial period: The 'pro' edition will let you sync/upload directly to the Beryl AX if you install SFTP server on it. opkg update && opkg install openssh-sftp-server. FYI/Fun fact: VSCodium detects most of the conf as 'Ruby' 'Shell script' or 'Ini' are much more appropriate. Use tabs to match the formatting.