Hi Everyone,
Do you know if it’s possible to flash GL-AP1300 LTE with one of the last OpenWrt releases (21.xx or at least 19.xx )?
I’m trying to flash it using Uboot and Sysupgrade but it’s not working :
No result with Uboot
With Sysupgrade :
"sysupgrade openwrt-21.02.0-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-sysupgrade.bin
openwrt-21.02.0-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-sysupgrade.bin is not a valid FIT image
Image check ‘platform_check_image’ failed."
Thanks in advance for your help.
Regards,
alzhao
March 8, 2022, 11:00am
2
wait4ever:
You mean that after uboot flash the router does not boot?
the .bin file should be flashed using uboot.
Thanks for replying.
Using Uboot flash method I can get to the web page where I can upload the .bin file.
I can upload the file, it seems to do something, but after few minutes, the led keep blinking faster, the router seems not to reboot and openwrt is not installed.
I don’t know what am I missing here. Maybe the wrong file ? am using the following one:
https://downloads.openwrt.org/releases/21.02.2/targets/ipq40xx/generic/openwrt-21.02.2-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-sysupgrade.bin
Oh my God,
I don’t know how I can thank you. Its working !!
I was struggling with this issue since several weeks and you just saved me !
Thanks again for your help (Sorry for le bad english).
1 Like