GL-AXT1800 with e3372h in stick mode. No comgt-ncm package

Technical Support for Routers
22

I’ve tried this modem on my laptop with PopOS 22.04 live CD… It works fine out of the box. Here is the log from this PC.

[ 23.916978] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[ 24.066140] usb 3-2: New USB device found, idVendor=12d1, idProduct=1506, bcdDevice= 1.02
[ 24.066160] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 24.066169] usb 3-2: Product: HUAWEI_MOBILE
[ 24.066175] usb 3-2: Manufacturer: HUAWEI_MOBILE
[ 24.077314] usb-storage 3-2:1.3: USB Mass Storage device detected
[ 24.077562] scsi host7: usb-storage 3-2:1.3
[ 24.078017] usb-storage 3-2:1.4: USB Mass Storage device detected
[ 24.079313] scsi host8: usb-storage 3-2:1.4
[ 24.267672] usbcore: registered new interface driver usbserial_generic
[ 24.267692] usbserial: USB Serial support registered for generic
[ 24.372648] usbcore: registered new interface driver option
[ 24.372667] usbserial: USB Serial support registered for GSM modem (1-port)
[ 24.372749] option 3-2:1.0: GSM modem (1-port) converter detected
[ 24.372870] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 24.373276] option 3-2:1.1: GSM modem (1-port) converter detected
[ 24.373641] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 24.714999] usbcore: registered new interface driver cdc_ether
[ 24.785782] usbcore: registered new interface driver cdc_ncm
[ 24.856912] usbcore: registered new interface driver cdc_wdm
[ 24.894078] huawei_cdc_ncm 3-2:1.2: MAC-Address: 00:1e:10:1f:00:00
[ 24.894085] huawei_cdc_ncm 3-2:1.2: setting rx_max = 16384
[ 24.894291] huawei_cdc_ncm 3-2:1.2: NDP will be placed at end of frame for this device.
[ 24.894361] huawei_cdc_ncm 3-2:1.2: cdc-wdm0: USB WDM device
[ 24.894776] huawei_cdc_ncm 3-2:1.2 wwan0: register ‘huawei_cdc_ncm’ at usb-0000:00:14.0-2, Huawei CDC NCM device, 00:1e:10:1f:00:00
[ 24.894860] usbcore: registered new interface driver huawei_cdc_ncm
[ 25.068389] huawei_cdc_ncm 3-2:1.2 wwx001e101f0000: renamed from wwan0

wwx001e101f0000: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.24.224.24 netmask 255.255.0.0 broadcast 172.24.255.255
ether 00:1e:10:1f:00:00 txqueuelen 1000 (Ethernet)
RX packets 11275 bytes 10893452 (10.8 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8598 bytes 955563 (955.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

23

May I remote control your device at some time?

24

Any update on that? Will there be a solution?

1 Like
25

Also same issue with 3372 cant get it to work on both Brume 2 and Mango v2 with fw 4. From this post it suggested it worked in the past on fw 3.x: Using the Huawei E3372 4G Dongle with OpenWRT · GitHub

The last step is not working getting ipv4, tx always show 0. Something is broken on Glinets Openwrt fw preventing it to work. It works on normal Linux, also seems to have worked in the past with fw 3.x