GL-B3000 Marble – Issue with Automatic Deletion of LAN Address Reservations

Technical Support for Routers
1

Why does the GL-B3000 Marble router automatically delete LAN address reservations?

I have a problem where, despite setting LAN address reservations, the settings reset after a few days, and the entire table disappears. The DHCP server then assigns new addresses.

Current Firmware
Version
4.5.19

2

Hello,

Do you set the address reservation in GL GUI > Network > LAN, or are you configured in Luci > Network > DHCP?

Generally after configuring in GL GUI, and do not change anything in Luci about the address reservation and related settings.

4

I made the reservation in this place:

GL GUI > Network > LAN

And that's all

5

I'm not reproducing the issue on my router.

image
image1302×919 50.5 KB

SSH: cat /etc/config/dhcp

image
image1140×598 14.1 KB

If the problem reappears, you can check the configuration file cat /etc/config/dhcp on the SSH, to see if there are MAC record.

6

For few days i hade this reservation and next 2 times router delete this settings without my confirmation

7

Please check the configuation by SSH to router with cat /etc/config/dhcp.

When you set up reservation, and check it once.
When the reservation lost, check it once again.