GL-MT2500 brume 2 is dead

Technical Support for Routers
1

I've had the Brume 2 for some time and it always worked well, but it stopped working, it doesn't recognize the network cable, I've already tested the router port connected to my PC and it's working. When I connect the Brume 2 LAN to the PC there is no IP, this is 192.168.8.1 (default ipv4 getway) and nothing, I turn it off and nothing, reset button, it doesn't do anything. The blue light is always on. I don't know what to do anymore. it happened out of nowhere. The device is approximately 2 years old.

2

  1. Please try flashing the firmware on the uboot.
    The firmware of MT2500 on the firmware download center: GL.iNet download center

  2. If the uboot does not debrick the Brume2, please contact our support team support@gl-inet.com, and cite this thread.

4

I already tried but it gave me an error:

image
image970×322 11.7 KB

the error is : " UPDATED FAILED, something wrong in update, try again or contact the author....."
this is tehe version that i try, is the last ;
bin: openwrt-mt2500-4.7.0-1205-1733363804.bin
uboot version 2022.07 -rc3

5

Hi, please contact our support team support@gl-inet.com, and cite this thread.

6

I have exactly the same problem, tried exactly the same resolutions and still have the blue-light-of-death.

In my case it just stopped routing traffic, then I rebooted it using the web interface and it never came back. :cry: