Which country is it set to from factory?
Did you change country in /etc/config/wireless?
So on your side, MT3000 does see APs above channel 64 but doesn’t connect if they are set to 80MHz ?
Looks like I’ll have to do some more testing on the weekend.
Thank you!
In latest snapshot, in Luci admin, in Network menu there is now “MTk WiFi”, nice addition, is it doing anything more than set country codes in /etc/config/wireless?
Which country should I choose to see channels 12-13 on 2G, did try a couple countries that should have 1-13 but not seeing any APs on 12-13.
Thank you!
Change to JP (Japan) or DE (Germany)
Updated AXT1800 to today’s snapshot, set up 2G AP to channel 13.
Updated MT3000 to today’s snapshot, in GL-iNet Admin Panel, join wifi doesn’t see it, Luci Channel Analysis displays only 1-11 on its chart.
Btw, 2G JP should have 1-14 channels IIRC.
I tested channel 13 when setting to JP is OK.
How to see channels above 140 on 5GHz? I’m on latest 4.2.1 snapshot and can’t see any networks i need to connect, and have DFS enabled.
Edit: Got it, changed country to TW
Just be aware that if you are in a country where the channels are restricted you might be visited by the governing agency of the radio waves. In the U.S.A it is the FCC
My MT3000 has http://192.168.8.1/cgi-bin/luci/admin/network/mtkwifi with “Country Code” setting for each band. This works fine and doesn’t mess anything.