GL-MT3000 : WiFi DHCP not working for HP SPECTRE-X360 under Win11

Routers VPN, DNS, Leaks
1

exactly as it says in subject:

  • win11 can't obtain DHCP IP over WiFi, neither 2G not 5G.

  • router is in the repeater mode.

  • staticly assigned IP on Win11 works.

please, help

BTW, does it have VPN Kill Switch?

2

Hello,

I would like to further confirm that the WiFi of Win11 has been connected to MT3000, cannot obtain DHCP IP, but WiFi is connected, right?

Does the MT3000 enable clients black/white list management?
Is configured a reserved IP for the Win11?

Please share the issue syslog of "Win11 connect to MT3000" through PM and let me know Win11 MAC address. I would like to check the WiFi connection and DHCP interaction through this syslog.

Supported VPN KillSwitch:
in v4.7 and before, called "Block Non-VPN Traffic"

image
image1308×762 45.9 KB

in v4.8 and later versions, called "KillSwitch"

image
image1589×845 77.4 KB

4

I would like to further confirm that the WiFi of Win11 has been connected to MT3000, cannot obtain DHCP IP, but WiFi is connected, right?

correct

Does the MT3000 enable clients black/white list management?

no

Is configured a reserved IP for the Win11?

yes, but does not make any difference

Please share the issue syslog of "Win11 connect to MT3000" through PM and let me know Win11 MAC address. I would like to check the WiFi connection and DHCP interaction through this syslog.

log with comments follows in PM

thanks, @bruce

1 Like