Hi all !
Can some one explain how to activate the wep protocol on my new router ?
Best regards.
S.
Hi all !
Can some one explain how to activate the wep protocol on my new router ?
Best regards.
S.
Sorry i cant answer your question, but i can offer advice. Dont use wep. A wep password can be cracked in just minutes by even an amateur. There are tutorials all over the net on how to do it. Of course, you may have a reason for using it. Your choice…
I know, it’s just for my country-side house. There is an old box there … no worries
I read somewhere on the forum, that via SSH you could activate WEP encryption on this device. But I don’t know how. How to connect to the router via ssh and how to edit the files.
Thanks for your answer. Wether i’m using Yummy ftp on mac or Winscp on Win i get the same error. See screenshots below. I’m using wifi.
The first screenshot should be correct. Maybe just a wrong password.
The 2nd screenshot says sftp, which means wrong protocol. Should be scp, which is different from sftp.
Thanks a lot, the connection worked.
I did the text file editing as mentionned in this post: GL-MT300N V2 "Mango" Wifi WEP security encryption
I rebooted the router, but I can’t seem to find the wep setting anywhere ? Any hint ?
The setting is in /etc/config/wireless
Can you post the content of this file?
Here it is.
"
config wifi-device ‘mt7628’
option type ‘mt7628’
option ht_txstream ‘2’
option ht_rxstream ‘2’
option noscan ‘0’
option txpower ‘20’
option txpower_max ‘20’
option country ‘US’
option region ‘0’
option band ‘2G’
option mimops ‘3’
option wmm ‘1’
option htmode ‘HT20’
option hwmode ‘11g’
option channel ‘1’
config wifi-iface
option device ‘mt7628’
option network ‘lan’
option mode ‘ap’
option encryption ‘psk2’
option wds ‘1’
option disassoc_low_ack ‘0’
option ifname ‘ra0’
option ssid ‘MANGO’
option key ‘********’
config wifi-iface ‘guest2g’
option device ‘mt7628’
option network ‘guest’
option mode ‘ap’
option wds ‘1’
option ssid ‘GL-MT300N-V2-d57-Guest’
option encryption ‘psk2’
option key ‘goodlife’
option ifname ‘ra1’
option disabled ‘1’
option guest ‘1’
option disassoc_low_ack ‘0’
config wifi-iface ‘sta’
option device ‘mt7628’
option mode ‘sta’
option ifname ‘apcli0’
option ssid ‘freeboxcharlot’
option channel ‘1’
option encryption ‘psk2’
option key ‘1234567890’
option disabled ‘1’
option network ‘lan’
"