GL-RM1 ATX board power buttons not functioning

KVM
1

I just got my GL-RM1 with the ATX board, hooked everything up and it seems the power buttons in the UI do not function. The physical power button does work as a pass through however. Anyone know what might be wrong?

I also noticed that the provided cable the polarity on the reset switch is backwards and the red wire is actually the ground, but I don't think that matters for the reset switch, and the reset switch does work in the UI.

2

please try flipping the connector polarity of the power buttons signal(motherboard to ATX board).
After that, if it works,and the physical power button do not work. please flip the connector polarity too(ATX to PC chassis)

1 Like
4

That worked, didn't need to swap the polarity to the ATX board from the case afterwards.

1 Like