Hi there, I have recently purchased the Mudi travel router, it shows connected on the interface - however, devices (laptop) shows no internet. I have rebooted many times, can you please advise.
Can you drop me an email support at glinet.biz?
Pls give details e.g. carrier, screenshot of the UI, settings, firmware version.
Hello, I also have the same problem on GL.inet E750 mudi, I had version 3.217, it had a WiFi problem, it connected and disconnected continuously, I updated to 4.3.12 and now the WiFi connection seems more stable but that’s what happens, no internet , the company is Vodafone SPAIN.
You can do some test for the stability of the Wi-Fi connection.
We sell quite a few mudi routers, and quite a few are returned to us with booting problems, they do not finish starting, it is a good product, I hope that with the latest update, these problems will be corrected, I hope you can help me with the main issue to provide customer support
hello, does the device actually have a network?
If you access the internet without problem, the VPN is active.
In the configuration panel the traffic appears as sent and received and in the vpn the same
ls /tmp/run/mwan3
Take a look at the return result of this command
Disable multi-wan load
It turns off, it says that it does not give internet when connecting via wifi, and it works slowly. I send you the log, but it gives me problems in several routers, the same thing always happens, in which section can I put the terminal, for the command
logread.tar (114.5 KB)
214 / 5.000
It turns off, it says that it does not give internet when connecting via wifi, and it works slowly. I send you the log, but it gives me problems in several routers, the same thing always happens, in which section can I put the terminal, for the command
CREATED N_J_V_address_external=address-external SHLVL=2 J_V_keep=1 HOME=/ HOTPLUG_TYPE=wireguard T_J_V_interface=string J_V_ifname=wgclient T_J_V_link_up=boolean LOGNAME=root DEVICENAME= T_J_V_action=int TERM=linux SUBSYSTEM=wireguard PATH=/usr/sbin:/usr/bin:/sbin:/bin CONFIG_LIST_STATE= J_V_interface=wgclient K_J_V= action ifname link_up address_external keep interface J_V_link_up=1 J_V_action=0 T_J_V_address_external=boolean N_J_V_link_up=link-up T_J_V_keep=boolean PWD=/ JSON_CUR=J_V CONFIG_SECTIONS=global AzireVPN Mullvad FromApp group_9617 group_2584 group_1903 group_7155 peer_2001 CONFIG_cfg030f15_ports=
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth cryptohash DNSSEC no-ID loop-detect inotify dumpfile
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.8.100 -- 192.168.8.249, lease time 12h
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.wg
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using nameserver 10.2.0.1#53
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 3 addresses
Tue Oct 1 21:08:45 2024 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Oct 1 21:08:46 2024 user.notice firewall: Reloading firewall due to ifdown of wgclient ()
Tue Oct 1 21:08:53 2024 user.notice mwan3[16475]: Execute ifup event on interface wgclient (wgclient)
Tue Oct 1 21:08:54 2024 user.notice mwan3[16475]: Starting tracker on interface wgclient (wgclient)
Tue Oct 1 21:08:59 2024 user.info mwan3rtmon[6655]: Detect rtchange event.
Tue Oct 1 21:09:02 2024 user.notice firewall: Reloading firewall due to ifup of wgclient (wgclient)
As you have vpn enabled, what we need to check if the Internet works OK without VPN. So we can narrow down to cellular or vpn part.
Can you try turning off the vpn？