HP M452 Printer and IoT Devices Not Connecting to 2.4 GHz Wi-Fi After Router Change

[haydar]

Hi everyone,

I recently switched my router from a VX420-G2V model to a Flint-2 Glinet, and now I'm facing an issue. My HP M452 printer, which previously connected to the Wi-Fi without problems, no longer detects the wifi network. Additionally, I've noticed that some of my smart light bulbs and other IoT devices also cannot connect to the 2.4 GHz Wi-Fi network.

Has anyone experienced a similar issue with this router, or does anyone have any ideas about what could be causing this problem?

I tried switching wifi mode and wifi security, but no luck.

SS is my 2.4Ghz settings. Any help would be greatly appreciated!

Thanks in advance!

[bruce]

Hello,

1. Can other clients (such as PC/Phone) search and connect to this 2.4GHz WiFi normally?

2. Please try setting TX Power to Medium, WiFi mode to 11b/g/n, Bandwidth to 20MHz, channel to 1 for 2.4GHz WiFi, and let the clients connect again.

3. Please try to install the 4.7.0-op24 firmware.