-
Create a connection account
root@GL-AR750S:/# vpncmd vpncmd command - SoftEther VPN Command Line Management Utility SoftEther VPN Command Line Management Utility (vpncmd command) Version 4.25 Build 9656 (English) Compiled 2018/01/15 09:33:22 by yagi at pc33 Copyright (c) SoftEther VPN Project. All Rights Reserved. By using vpncmd program, the following can be achieved. 1. Management of VPN Server or VPN Bridge 2. Management of VPN Client 3. Use of VPN Tools (certificate creation and Network Traffic Speed Test Tool) Select 1, 2 or 3: 2 Specify the host name or IP address of the computer that the destination VPN Client is operating on. If nothing is input and Enter is pressed, connection will be made to localhost (this computer). Hostname of IP Address of Destination: Access has been denied. Possibly the password is incorrect, or perhaps you are connecting by an incorrect admin mode. You can try inputting the password again. To cancel, press Ctrl+D. Password: ********* Connected to VPN Client "localhost". VPN Client>AccountCreate AccountCreate command - Create New VPN Connection Setting Name of VPN Connection Setting: test Destination VPN Server Host Name and Port Number: 192.168.17.163:5555 Destination Virtual Hub Name: glinet Connecting User Name: test1 Used Virtual Network Adapter Name: vpn The command completed successfully. -
Set Account Password and connect to server
VPN Client>AccountPasswordSet AccountPasswordSet command - Set User Authentication Type of VPN Connection Setting to Password Authentication Name of VPN Connection Setting: test Please enter the password. To cancel press the Ctrl+D key. Password: ********* Confirm input: ********* Specify standard or radius: standard The command completed successfully. VPN Client>AccountConnect AccountConnect command - Start Connection to VPN Server using VPN Connection Setting Name of VPN Connection Setting: test The command completed successfully. VPN Client>AccountList AccountList command - Get List of VPN Connection Settings Item |Value ----------------------------+---------------------------------------------- VPN Connection Setting Name |test Status |Connected VPN Server Hostname |192.168.17.163:5555 (Direct TCP/IP Connection) Virtual Hub |glinet Virtual Network Adapter Name|vpn The command completed successfully. VPN Client> -
Add an interface to network uci and restart network
uci set network.vpn=interface uci set network.vpn.ifname='vpn_vpn' uci set network.vpn.proto='dhcp' uci commit network /etc/init.d/network restart
It should work now.
root@GL-AR750S:/# ifconfig vpn_vpn
vpn_vpn Link encap:Ethernet HWaddr 00:AC:84:B1:99:85
inet addr:192.168.17.117 Bcast:192.168.17.255 Mask:255.255.255.0
inet6 addr: fe80::28f4:2aff:fe97:8aa4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:337 errors:0 dropped:0 overruns:0 frame:0
TX packets:180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:42671 (41.6 KiB) TX bytes:59868 (58.4 KiB)