Hello, to what setting does the IPV6 option has to be set when using 5G SA on T-Mobile?
Native, passthrough, NAT6 or Static?
Native or Passthrough, because these two modes can get the global unicast address.
But I’m not sure if T-Moblie supports dhpcv6-pd, so you can try using native first and then passthrough if your lan device can’t get ipv6.
Did you ever figure this out?
My Flint 2 shows an ipv6 address on TMHI but fails test-ipv6.com no matter if I set Passthrough, Native, or Nat6.