Is it possible to create smth like mesh beetween Slate AX and Beryl AX?

Router
2

Hi,

Currently, mesh networking is not supported.

As an alternative, you can enable 802.11k/v/r to improve roaming performance between access points, while 802.11k and 802.11v are enabled by default.

To enable 802.11r, open LuCI > Network > Wireless, click Edit next to the target SSID, and enable 802.11r Fast Transition in the WLAN Roaming section.

image
image1094×717 43.9 KB

Please note that the Beryl AX requires the OpenWrt 24 (op24) firmware for 802.11r support. The firmware can be downloaded from:

Feature request: Wifi mesh mode for GL.iNet routers