Thank you! I found the manual for EC25 which had the information I needed.
First, I executed
AT+COPS? to get the current setting, which for me returned:
The syntax for the command is
<mode>[,<format>[,<oper>][,<Act>]]. I think
LTE for my EC06, I’ve configured it to only connect to LTE.
After a bit of trial and error, this command seemed to do the trick, returning
4 as mode, which falls back to automatic mode (
0) if the operator is not found.
Note that the command only worked when I used single quotes. For some reason, double quotes resulted in
+CME ERROR: 22, meaning “not found”. Took some experimenting to figure out.
AT+COPS? command confirmed that the change was saved:
Hopefully this is useful information for someone else out there
Suggestion to GL-iNet:
It would be nice to have this as an AT command shortcut, similar to “Set band”.