MV-1000 how to get the correct cpu temperature

while I use this script to monitor the cpu temperature, it always show me +67.0°C.
so ,i have some Suspect on this temperature.
anyone can give me some way to catch the correct temperature?

root@GL-MV1000:~# sensors |tail -n +1
Adapter: MDIO adapter
temp1:        +67.0°C  (crit = +100.0°C)

Adapter: MDIO adapter
temp1:        +67.0°C  (crit = +100.0°C)

Adapter: MDIO adapter
temp1:        +67.0°C  (crit = +100.0°C)

Since you’ve installed “lm-sensors” and you are wondering the temperature inside is correct or not, how about have hair drier blow hot air to it and you will know if the temperature changes, if it arises then it proves the sensors are working. :laughing:

I added some monitoring devices to monitor the temperature of the cpu. After several days, I always found that the temperature has not changed. Therefore, I have this doubt.

I see.

My situation is that with a fan blow the bottom of Brume-W, it shows me the temperature inside is 52°C, if I take the fan away the temperature starts rising slowly to 6x°C.

Now I have added one inkstone below. I want to monitor the CPU temperature, and then on some temperatures, the fan will start by itself, instead of running 7*24 hours.

Didn’t try reading temperature on MV1000. So not sure if the data are actually correct.