Need ART Partition Data

Technical Support for Routers
1

Hello,

I have somehow managed to erase the art partition on a GL-AR300M Lite

This is the serial output of the bootloader:

U-Boot 1.1.4-g36de7573-dirty (May 27 2017 - 10:55:06)

DRAM:  128 MB
Nor Flash:  16 MB, sector count = 256
*** Warning *** : PCIe WLAN Module not found !!!
ath_spi_nand_ecc: Couldn't enable internal ECC
Protect off 9F040000 ... 9F04FFFF
Un-Protecting sectors 4..4 in bank 1
Un-Protected 1 sectors
Erasing Flash...Erasing flash...
First 0x4 last 0x4 sector size 0x10000                                                                                                                          4
Erased 1 sectors
Writing to Flash... write addr: 9f040000
done
Protecting sectors 4..4 in bank 1
Protected 1 sectors
Warning: Bootlimit (3) exceeded. Using altbootcmd.
Hit any key to stop autoboot: -99
Cannot find art, please flash the default art first.

I am aware that i can flash the art via tftpd, but I need somebody from GL-Inet to create the file for me.
This is the routers sticker:

gl-inet
gl-inet922×1225 167 KB

last time @hansome was able to help me with a similar problem...

Thanks in advance

Cheers...

2

Hi,

Sorry.
The production date of this router should be on 2018-08-28.
It has been too long ago and the R&D said the art codes of this model have been cleaned up.