No Internet Connection - GL-MT3000

Technical Support for Routers
1

Yesterday, the device was functioning properly. However, after unplugging it for the night and reconnecting it today, I am not able to connect to the internet via Ethernet (WAN, Wireguard) using a CAT8 cable.

I’m only using the default settings so adguard, tor any additional apps are turned off. I tried with both using the VPN service provider vs using none, and either way I still don’t see any wifi networks.

I’ve attempted various troubleshooting steps, including rebooting the device, resetting the firmware back to factory settings, and connecting to just Wi-Fi without the cable, but no wifi networks appear, including my phone’s hotspot.

Additionally, I’ve tried downgrading from version 4.4.6 to 4.4.5
Not sure about the next steps to resolve this issue, could it be a faulty device? Posted this on reddit, though not much response.

2

Here is the system Log:
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13271.783836] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 124, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13271.899827] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 124, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13271.952278] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=44, ctrl_ch2=0, cent_ch=42, RxPath=7, BandIdx=1, ChBand=1, BW=2,TXStream=3, RXStream=7, scan(0)
Fri Aug 11 14:48:43 2023 kern.err kernel: [13271.966392] 7981@C12L1,EDCCAInit() 21006: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13271.977383] 7981@C23L3,scan_ch_restore() 252: End of SCAN(TYPE: 8, BandIdx: 1), restore to BW(2) channel 42, Total BSS[00]
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13271.988425] 7981@C08L3,UpdateBeaconHandler() 1931: BCN_UPDATE_ENABLE_TX, OmacIdx = 0 (rax0)
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13271.996773] 7981@C08L3,UpdateBeaconHandler() 1936: Band1 BcnInitedRnd = 127308
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13272.015837] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 124, bScanning = 1, BreakTime = 0[0]
Fri Aug 11 14:48:43 2023 kern.notice kernel: [13272.120095] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 124, bScanning = 1, BreakTime = 1[0]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.223833] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 124, bScanning = 1, BreakTime = 2[0]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.236582] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=128, ctrl_ch2=0, cent_ch=128 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:44 2023 kern.warn kernel: [13272.249717] 7981@C03L2,ExtEventBeaconLostHandler() 170: FW EVENT (94:83:c4:2c:99:8b), Reason 0x10
Fri Aug 11 14:48:44 2023 kern.err kernel: [13272.249722] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.278184] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=128, ctrl_ch2=0, cent_ch=128, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.339835] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 128, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.436319] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=132, ctrl_ch2=0, cent_ch=132 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.455870] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 132, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.468587] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=132, ctrl_ch2=0, cent_ch=132, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.571869] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 132, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.624336] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=136, ctrl_ch2=0, cent_ch=136 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.650219] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=136, ctrl_ch2=0, cent_ch=136, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.687843] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 136, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.799965] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 136, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.816321] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=140, ctrl_ch2=0, cent_ch=140 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.842249] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=140, ctrl_ch2=0, cent_ch=140, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13272.907830] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 140, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13273.000292] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=144, ctrl_ch2=0, cent_ch=144 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13273.023829] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13273.036481] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=144, ctrl_ch2=0, cent_ch=144, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:44 2023 kern.notice kernel: [13273.139831] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.192253] 7981@C23L3,operate_loader_phy() 394: oper_cfg: prim_ch(44), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177!
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.203902] 7981@C23L3,operate_loader_phy() 408: oper_dev after adjust: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0),ext_cha(1)!
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.215554] 7981@C23L3,operate_loader_phy() 428: oper_radio after decision: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0)!
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.226692] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=44, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=3, RXStream=3, scan(0)
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.256089] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.371841] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.452674] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=44, ctrl_ch2=0, cent_ch=42, RxPath=7, BandIdx=1, ChBand=1, BW=2,TXStream=3, RXStream=7, scan(0)
Fri Aug 11 14:48:45 2023 kern.err kernel: [13273.466902] 7981@C12L1,EDCCAInit() 21006: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.477926] 7981@C23L3,scan_ch_restore() 252: End of SCAN(TYPE: 8, BandIdx: 1), restore to BW(2) channel 42, Total BSS[00]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.489050] 7981@C08L3,UpdateBeaconHandler() 1931: BCN_UPDATE_ENABLE_TX, OmacIdx = 0 (rax0)
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.497398] 7981@C08L3,UpdateBeaconHandler() 1936: Band1 BcnInitedRnd = 127321
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.504758] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[0]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.619841] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 1[0]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.735828] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 2[0]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.748587] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=149, ctrl_ch2=0, cent_ch=149 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:45 2023 kern.warn kernel: [13273.761727] 7981@C03L2,ExtEventBeaconLostHandler() 170: FW EVENT (94:83:c4:2c:99:8b), Reason 0x10
Fri Aug 11 14:48:45 2023 kern.err kernel: [13273.761731] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.790754] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=149, ctrl_ch2=0, cent_ch=149, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.851848] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 149, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.948315] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=153, ctrl_ch2=0, cent_ch=153 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.967829] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 153, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13273.980463] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=153, ctrl_ch2=0, cent_ch=153, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13274.083831] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 153, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13274.136315] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=157, ctrl_ch2=0, cent_ch=157 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:45 2023 kern.notice kernel: [13274.162600] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=157, ctrl_ch2=0, cent_ch=157, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.187830] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 157, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.291832] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 157, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.320322] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=161, ctrl_ch2=0, cent_ch=161 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.346588] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=161, ctrl_ch2=0, cent_ch=161, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.408212] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 161, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.504295] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=165, ctrl_ch2=0, cent_ch=165 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.511829] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.530627] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=165, ctrl_ch2=0, cent_ch=165, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.623828] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.688243] 7981@C23L3,operate_loader_phy() 394: oper_cfg: prim_ch(44), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177!
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.699892] 7981@C23L3,operate_loader_phy() 408: oper_dev after adjust: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0),ext_cha(1)!
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.711546] 7981@C23L3,operate_loader_phy() 428: oper_radio after decision: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0)!
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.722638] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=44, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=3, RXStream=3, scan(0)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.739831] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.855833] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.947457] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=44, ctrl_ch2=0, cent_ch=42, RxPath=7, BandIdx=1, ChBand=1, BW=2,TXStream=3, RXStream=7, scan(0)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.959836] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
Fri Aug 11 14:48:46 2023 kern.err kernel: [13274.973718] 7981@C12L1,EDCCAInit() 21006: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.984711] 7981@C23L3,scan_ch_restore() 252: End of SCAN(TYPE: 8, BandIdx: 1), restore to BW(2) channel 42, Total BSS[00]
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13274.995758] 7981@C08L3,UpdateBeaconHandler() 1931: BCN_UPDATE_ENABLE_TX, OmacIdx = 0 (rax0)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13275.004104] 7981@C08L3,UpdateBeaconHandler() 1936: Band1 BcnInitedRnd = 127335
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13275.011433] 7981@C23L3,cntl_scan_conf() 624: reset scan fsm, current status is 0x0
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13275.019003] 7981@C08L3,UpdateBeaconHandler() 1931: BCN_UPDATE_ENABLE_TX, OmacIdx = 0 (rax0)
Fri Aug 11 14:48:46 2023 kern.notice kernel: [13275.027350] 7981@C08L3,UpdateBeaconHandler() 1936: Band1 BcnInitedRnd = 127335
Fri Aug 11 14:48:46 2023 kern.debug kernel: [13275.034654] SCAN DONE, Reset FSM/CNTL IDLE.
Fri Aug 11 14:48:48 2023 kern.notice kernel: [13275.038841] 7981@C23L3,ReleaseChannelOpCharge() 1308: the ChOpCharge of owner=2 is released now!!
Fri Aug 11 14:48:48 2023 kern.notice kernel: [13275.038841]
Fri Aug 11 14:48:48 2023 kern.debug kernel: [13276.531834] BcnCheck start after 3500 ms (ra0)
Fri Aug 11 14:48:49 2023 daemon.err lua: (…arch64_cortex-a53/gl-sdk4-repeater/usr/sbin/repeater:1721) /usr/lib/lua/gl/wifi.lua:123: bad argument #1 to ‘sub’ (integer expected, got nil)
Fri Aug 11 14:48:50 2023 kern.debug kernel: [13279.147833] BcnCheck start after 1000 ms (ra0)
Fri Aug 11 14:48:51 2023 daemon.info lua: (…arch64_cortex-a53/gl-sdk4-repeater/usr/sbin/repeater:563) load config…
Fri Aug 11 14:48:51 2023 daemon.info lua: (…arch64_cortex-a53/gl-sdk4-repeater/usr/sbin/repeater:477) delete sta from /etc/config/wireless
Fri Aug 11 14:48:51 2023 daemon.info lua: (…arch64_cortex-a53/gl-sdk4-repeater/usr/sbin/repeater:500) Manager created…
Fri Aug 11 14:48:52 2023 daemon.info lua: (…arch64_cortex-a53/gl-sdk4-repeater/usr/sbin/repeater:412) found device: mt798111 mtk ra0 2g
Fri Aug 11 14:48:52 2023 daemon.info lua: (…arch64_cortex-a53/gl-sdk4-repeater/usr/sbin/repeater:412) found device: mt798112 mtk rax0 5g

Kernal Log

RXStream=3, scan(1)
[13272.842249] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=140, ctrl_ch2=0, cent_ch=140, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
[13272.907830] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 140, bScanning = 1, BreakTime = 0[1]
[13273.000292] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=144, ctrl_ch2=0, cent_ch=144 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
[13273.023829] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
[13273.036481] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=144, ctrl_ch2=0, cent_ch=144, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
[13273.139831] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
[13273.192253] 7981@C23L3,operate_loader_phy() 394: oper_cfg: prim_ch(44), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177!
[13273.203902] 7981@C23L3,operate_loader_phy() 408: oper_dev after adjust: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0),ext_cha(1)!
[13273.215554] 7981@C23L3,operate_loader_phy() 428: oper_radio after decision: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0)!
[13273.226692] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=44, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=3, RXStream=3, scan(0)
[13273.256089] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
[13273.371841] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[1]
[13273.452674] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=44, ctrl_ch2=0, cent_ch=42, RxPath=7, BandIdx=1, ChBand=1, BW=2,TXStream=3, RXStream=7, scan(0)
[13273.466902] 7981@C12L1,EDCCAInit() 21006: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[13273.477926] 7981@C23L3,scan_ch_restore() 252: End of SCAN(TYPE: 8, BandIdx: 1), restore to BW(2) channel 42, Total BSS[00]
[13273.489050] 7981@C08L3,UpdateBeaconHandler() 1931: BCN_UPDATE_ENABLE_TX, OmacIdx = 0 (rax0)
[13273.497398] 7981@C08L3,UpdateBeaconHandler() 1936: Band1 BcnInitedRnd = 127321
[13273.504758] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 0[0]
[13273.619841] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 1[0]
[13273.735828] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 144, bScanning = 1, BreakTime = 2[0]
[13273.748587] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=149, ctrl_ch2=0, cent_ch=149 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
[13273.761727] 7981@C03L2,ExtEventBeaconLostHandler() 170: FW EVENT (94:83:c4:2c:99:8b), Reason 0x10
[13273.761731] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[13273.790754] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=149, ctrl_ch2=0, cent_ch=149, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
[13273.851848] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 149, bScanning = 1, BreakTime = 0[1]
[13273.948315] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=153, ctrl_ch2=0, cent_ch=153 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
[13273.967829] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 153, bScanning = 1, BreakTime = 0[1]
[13273.980463] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=153, ctrl_ch2=0, cent_ch=153, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
[13274.083831] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 153, bScanning = 1, BreakTime = 0[1]
[13274.136315] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=157, ctrl_ch2=0, cent_ch=157 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
[13274.162600] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=157, ctrl_ch2=0, cent_ch=157, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
[13274.187830] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 157, bScanning = 1, BreakTime = 0[1]
[13274.291832] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 157, bScanning = 1, BreakTime = 0[1]
[13274.320322] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=161, ctrl_ch2=0, cent_ch=161 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
[13274.346588] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=161, ctrl_ch2=0, cent_ch=161, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
[13274.408212] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 161, bScanning = 1, BreakTime = 0[1]
[13274.504295] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=165, ctrl_ch2=0, cent_ch=165 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
[13274.511829] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
[13274.530627] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=165, ctrl_ch2=0, cent_ch=165, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
[13274.623828] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
[13274.688243] 7981@C23L3,operate_loader_phy() 394: oper_cfg: prim_ch(44), ht_bw(1), extcha(1), vht_bw(1), cen_ch_2(0), PhyMode=177!
[13274.699892] 7981@C23L3,operate_loader_phy() 408: oper_dev after adjust: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0),ext_cha(1)!
[13274.711546] 7981@C23L3,operate_loader_phy() 428: oper_radio after decision: bw(2), prim_ch(44), cen_ch_1(42), cen_ch_2(0)!
[13274.722638] 7981@C03L3,MtCmdChannelSwitch() 2538: ctrl_chl=44, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=3, RXStream=3, scan(0)
[13274.739831] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
[13274.855833] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
[13274.947457] 7981@C03L3,MtCmdSetTxRxPath() 2799: ctrl_chl=44, ctrl_ch2=0, cent_ch=42, RxPath=7, BandIdx=1, ChBand=1, BW=2,TXStream=3, RXStream=7, scan(0)
[13274.959836] 7981@C23L3,scan_partial_trigger_checker() 1612: (rax0) NumOfChannels = 5, LastScanChannel = 165, bScanning = 1, BreakTime = 0[1]
[13274.973718] 7981@C12L1,EDCCAInit() 21006: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[13274.984711] 7981@C23L3,scan_ch_restore() 252: End of SCAN(TYPE: 8, BandIdx: 1), restore to BW(2) channel 42, Total BSS[00]
[13274.995758] 7981@C08L3,UpdateBeaconHandler() 1931: BCN_UPDATE_ENABLE_TX, OmacIdx = 0 (rax0)
[13275.004104] 7981@C08L3,UpdateBeaconHandler() 1936: Band1 BcnInitedRnd = 127335
[13275.011433] 7981@C23L3,cntl_scan_conf() 624: reset scan fsm, current status is 0x0
[13275.019003] 7981@C08L3,UpdateBeaconHandler() 1931: BCN_UPDATE_ENABLE_TX, OmacIdx = 0 (rax0)
[13275.027350] 7981@C08L3,UpdateBeaconHandler() 1936: Band1 BcnInitedRnd = 127335
[13275.034654] SCAN DONE, Reset FSM/CNTL IDLE.
[13275.038841] 7981@C23L3,ReleaseChannelOpCharge() 1308: the ChOpCharge of owner=2 is released now!!
[13275.038841]
[13276.531834] BcnCheck start after 3500 ms (ra0)
[13279.147833] BcnCheck start after 1000 ms (ra0)

3

Downgrading to firmware 4.2.3 seems to get wifi working but not the ethernet

4

Hi @donkykong77 Is there any crash log?

5

The log seems normal.
We have a beta firmware for test. Could please to have a try. If possible please don’t keep setting.

6

I tried the beta firmware, and still no ethernet connection. Also tried switching out to a different unused cable(CAT5) and still nothing. Wifi seems to work fine, I am able to use as before.

I’m seeing the message:
"No cable detected in WAN port. Please insert an ethernet cable. Pre-Set Up "