Good morning I attach ssh screen and log file
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.63 (gl-ci@gl-ci-server) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28161-ea17e958b9) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Tue Dec 3 11:41:08 2024
[ 0.000000] Machine model: GL.iNet GL-MT6000
[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
[ 0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000
[ 0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000
[ 0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000
[ 0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
[ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff]
[ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff]
[ 0.000000] node 0: [mem 0x000000004ffc0000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 28 pages/cpu s75368 r8192 d31128 u114688
[ 0.000000] pcpu-alloc: s75368 r8192 d31128 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: root=PARTLABEL=rootfs rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x000000007fadc000-0x000000007fbdc000] (1MB)
[ 0.000000] Memory: 1005788K/1048576K available (10624K kernel code, 1832K rwdata, 3248K rodata, 896K init, 324K bss, 42788K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 34719 entries in 136 pages
[ 0.000000] ftrace: allocated 136 pages with 2 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000223] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000231] pid_max: default: 32768 minimum: 301
[ 0.002258] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002266] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.003850] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.004242] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.004298] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.004407] rcu: Hierarchical SRCU implementation.
[ 0.004410] rcu: Max phase no-delay instances is 1000.
[ 0.005030] smp: Bringing up secondary CPUs ...
[ 0.005320] Detected VIPT I-cache on CPU1
[ 0.005358] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.005386] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.005693] Detected VIPT I-cache on CPU2
[ 0.005715] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[ 0.005728] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005992] Detected VIPT I-cache on CPU3
[ 0.006012] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[ 0.006023] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.006053] smp: Brought up 1 node, 4 CPUs
[ 0.006056] SMP: Total of 4 processors activated.
[ 0.006059] CPU features: detected: 32-bit EL0 Support
[ 0.006061] CPU features: detected: CRC32 instructions
[ 0.006090] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.006093] CPU: All CPU(s) started at EL2
[ 0.006095] alternatives: applying system-wide alternatives
[ 0.009015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.009033] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.009793] pinctrl core: initialized pinctrl subsystem
[ 0.010740] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.011019] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.011036] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.011051] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.011355] thermal_sys: Registered thermal governor 'fair_share'
[ 0.011358] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.011360] thermal_sys: Registered thermal governor 'step_wise'
[ 0.011362] thermal_sys: Registered thermal governor 'user_space'
[ 0.011410] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.011451] ASID allocator initialised with 65536 entries
[ 0.012165] pstore: Using crash dump compression: deflate
[ 0.012169] pstore: Registered ramoops as persistent store backend
[ 0.012171] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.017917] Modules: 28496 pages in range for non-PLT usage
[ 0.017927] Modules: 520016 pages in range for PLT usage
[ 0.018866] cryptd: max_cpu_qlen set to 1000
[ 0.019751] SCSI subsystem initialized
[ 0.020032] libata version 3.00 loaded.
[ 0.021156] clocksource: Switched to clocksource arch_sys_counter
[ 0.047157] NET: Registered PF_INET protocol family
[ 0.047270] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.048503] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.048518] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.048528] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.048565] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.048731] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.048985] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[ 0.049069] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.049085] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.049321] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.049350] PCI: CLS 0 bytes, default 64
[ 0.050547] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.053874] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.053881] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.075474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.076534] gpio-export gpio-export: 1 gpio(s) exported
[ 0.079770] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.083064] printk: console [ttyS0] disabled
[ 0.103432] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2
[ 0.103472] printk: console [ttyS0] enabled
[ 0.921882] mtk_rng 1020f000.rng: registered RNG driver
[ 0.930259] loop: module loaded
[ 1.072854] i2c_dev: i2c /dev entries driver
[ 1.078462] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 1.087582] NET: Registered PF_INET6 protocol family
[ 1.093287] Segment Routing with IPv6
[ 1.096965] In-situ OAM (IOAM) with IPv6
[ 1.100921] NET: Registered PF_PACKET protocol family
[ 1.106015] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.119072] 8021q: 802.1Q VLAN Support v1.8
[ 1.159622] mtk-msdc 11230000.mmc: Final PAD_DS_TUNE: 0x14414
[ 1.166213] mmc0: new HS400 MMC card at address 0001
[ 1.172378] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 1.177932] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.185328] GPT:1 != 15269887
[ 1.188283] GPT:Alternate GPT header not at the end of the disk.
[ 1.194272] GPT:1 != 15269887
[ 1.197223] GPT: Use GNU Parted to correct GPT errors.
[ 1.202418] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 1.207945] mmcblk0boot0: mmc0:0001 8GTF4R 4.00 MiB
[ 1.213771] mmcblk0boot1: mmc0:0001 8GTF4R 4.00 MiB
[ 1.218887] mmcblk0rpmb: mmc0:0001 8GTF4R 512 KiB, chardev (250:0)
[ 1.984200] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc082180000, irq 119
[ 1.994174] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc082180000, irq 119
[ 2.102742] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
[ 2.111701] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 2.122434] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=124)
[ 2.144691] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=125)
[ 2.166640] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=126)
[ 2.188571] mt7530-mdio mdio-bus:1f lan5 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=127)
[ 2.431304] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mdio-bus:07] driver [RTL8221B-VB-CG 2.5Gbps PHY (C45)] (irq=62)
[ 2.443418] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[ 2.450134] DSA: tree 0 setup
[ 2.453437] clk: Disabling unused clocks
[ 2.459956] VFS: Mounted root (squashfs filesystem) readonly on device 179:7.
[ 2.468711] Freeing unused kernel memory: 896K
[ 2.473234] Run /sbin/init as init process
[ 2.477314] with arguments:
[ 2.480266] /sbin/init
[ 2.482965] with environment:
[ 2.486090] HOME=/
[ 2.488435] TERM=linux
[ 2.590194] init: Console is alive
[ 2.593723] init: - watchdog -
[ 3.032619] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.056316] gl_sdk4_hw_info: loading out-of-tree module taints kernel.
[ 3.064526] install gl_hw_info
[ 3.076415] usbcore: registered new interface driver usbfs
[ 3.081983] usbcore: registered new interface driver hub
[ 3.087320] usbcore: registered new device driver usb
[ 3.099527] gl-tertf: (C) 2021 jianhui zhao <jianhui.zhao@gl-inet.com>
[ 3.110832] gl-kmwan: (C) 2023 chongjun luo <luochognjun@gl-inet.com>
[ 3.129059] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
[ 3.137683] xhci-mtk 11200000.usb: xHCI Host Controller
[ 3.142932] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[ 3.153285] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[ 3.162489] xhci-mtk 11200000.usb: irq 128, io mem 0x11200000
[ 3.168320] xhci-mtk 11200000.usb: xHCI Host Controller
[ 3.173535] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[ 3.180913] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[ 3.188338] hub 1-0:1.0: USB hub found
[ 3.192131] hub 1-0:1.0: 2 ports detected
[ 3.196440] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.204947] hub 2-0:1.0: USB hub found
[ 3.208716] hub 2-0:1.0: 1 port detected
[ 3.218377] usbcore: registered new interface driver usb-storage
[ 3.225659] usbcore: registered new interface driver uas
[ 3.231234] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.245024] init: - preinit -
[ 3.547903] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 3.556383] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 3.576683] mt7530-mdio mdio-bus:1f lan1: configuring for phy/2500base-x link mode
[ 3.602125] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[ 3.632902] usb 2-1: LPM exit latency is zeroed, disabling LPM.
[ 7.874311] mount_root: loading kmods from internal overlay
[ 7.892793] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 7.902110] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 7.998154] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 8.005038] block: unable to load configuration (fstab: Entry not found)
[ 8.011754] block: attempting to load /tmp/overlay/etc/config/fstab
[ 8.018039] block: unable to load configuration (fstab: Entry not found)
[ 8.024751] block: attempting to load /etc/config/fstab
[ 8.032383] block: unable to load configuration (fstab: Entry not found)
[ 8.039098] block: no usable configuration
[ 8.043390] block: attempting to load /etc/config/fstab
[ 8.048633] block: unable to load configuration (fstab: Entry not found)
[ 8.056523] block: no usable configuration
[ 8.061188] loop0: detected capacity change from 0 to 15178752
[ 8.111157] loop0: detected capacity change from 15178752 to 15067520
[ 8.179640] F2FS-fs (loop0): Mounted with checkpoint version = 370eb56b
[ 8.227429] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 8.234733] block: extroot: not configured
[ 8.238963] block: attempting to load /etc/config/fstab
[ 8.244298] block: unable to load configuration (fstab: Entry not found)
[ 8.251005] block: no usable configuration
[ 8.256982] mount_root: switching to f2fs overlay
[ 8.263582] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 8.274928] urandom-seed: Seeding with /etc/urandom.seed
[ 8.402172] random: procd: uninitialized urandom read (4 bytes read)
[ 8.404484] procd: - early -
[ 8.411547] procd: - watchdog -
[ 8.958115] procd: - watchdog -
[ 8.961629] procd: - ubus -
[ 11.351392] random: crng init done
[ 11.356494] procd: - init -
[ 11.734722] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.768726] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 11.777051] tun: Universal TUN/TAP device driver, 1.6
[ 11.795810] urngd: v1.0.2 started.
[ 11.835112] GACT probability on
[ 11.839373] Mirror/redirect action on
[ 11.849292] u32 classifier
[ 11.852096] input device check on
[ 11.855752] Actions configured
[ 11.867436] fuse: init (API version 7.39)
[ 11.874924] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[ 11.904938] Bridge firewalling registered
[ 11.910447] usbcore: registered new interface driver cdc_acm
[ 11.916237] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 11.926312] usbcore: registered new interface driver cdc_wdm
[ 11.932748] Loading modules backported from Linux version v6.11.2-0-g7aa21fec187b
[ 11.940228] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942
[ 11.949936] usbcore: registered new interface driver ipheth
[ 12.097906] usbcore: registered new interface driver usbserial_generic
[ 12.104544] usbserial: USB Serial support registered for generic
[ 12.140196] xt_time: kernel timezone is -0000
[ 12.146203] usbcore: registered new interface driver cdc_ether
[ 12.153991] usbcore: registered new interface driver cdc_ncm
[ 12.200769] usbcore: registered new interface driver huawei_cdc_ncm
[ 12.285435] mt798x-wmac 18000000.wifi: attaching wed device 0 version 2
[ 12.322109] platform 15010000.wed: MTK WED WO Firmware Version: DEV_000000, Build Time: 20221012175005
[ 12.331449] platform 15010000.wed: MTK WED WO Chip ID 00 Region 3
[ 12.911664] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823160656a
[ 12.911664]
[ 13.016974] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823160721
[ 13.102320] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823160840
[ 13.208351] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
[ 13.262596] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
[ 13.317682] PPP generic driver version 2.4.2
[ 13.323455] NET: Registered PF_PPPOX protocol family
[ 13.330436] usbcore: registered new interface driver qmi_wwan
[ 13.338042] usbcore: registered new interface driver rndis_host
[ 13.348643] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 13.356510] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 13.367653] usbcore: registered new interface driver option
[ 13.373388] usbserial: USB Serial support registered for GSM modem (1-port)
[ 13.383227] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 16.973852] kmwan: sensitivity and mode are set.
[ 18.000221] tertf: br-lan registered, add it
[ 18.032336] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 18.051431] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 18.061393] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 18.066706] mt7530-mdio mdio-bus:1f lan1: configuring for phy/2500base-x link mode
[ 18.112464] br-lan: port 1(lan1) entered blocking state
[ 18.117706] br-lan: port 1(lan1) entered disabled state
[ 18.123068] mt7530-mdio mdio-bus:1f lan1: entered allmulticast mode
[ 18.129359] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
[ 18.138821] mt7530-mdio mdio-bus:1f lan1: entered promiscuous mode
[ 18.158686] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 18.173002] br-lan: port 2(lan2) entered blocking state
[ 18.178237] br-lan: port 2(lan2) entered disabled state
[ 18.183576] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode
[ 18.191742] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode
[ 18.206931] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 18.217779] br-lan: port 3(lan3) entered blocking state
[ 18.223198] br-lan: port 3(lan3) entered disabled state
[ 18.228471] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode
[ 18.237159] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode
[ 18.252316] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 18.263176] br-lan: port 4(lan4) entered blocking state
[ 18.268418] br-lan: port 4(lan4) entered disabled state
[ 18.273799] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode
[ 18.282846] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode
[ 18.297848] mt7530-mdio mdio-bus:1f lan5: configuring for phy/gmii link mode
[ 18.309508] br-lan: port 5(lan5) entered blocking state
[ 18.314798] br-lan: port 5(lan5) entered disabled state
[ 18.320095] mt7530-mdio mdio-bus:1f lan5: entered allmulticast mode
[ 18.329223] mt7530-mdio mdio-bus:1f lan5: entered promiscuous mode
[ 18.581297] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:01] driver [RTL8221B-VB-CG 2.5Gbps PHY (C45)] (irq=61)
[ 18.592202] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/2500base-x link mode
[ 20.420446] br-lan: port 6(wlan0) entered blocking state
[ 20.425831] br-lan: port 6(wlan0) entered disabled state
[ 20.431231] mt798x-wmac 18000000.wifi wlan0: entered allmulticast mode
[ 20.437969] mt798x-wmac 18000000.wifi wlan0: entered promiscuous mode
[ 20.504229] br-lan: port 6(wlan0) entered blocking state
[ 20.509556] br-lan: port 6(wlan0) entered forwarding state
[ 20.515863] br-lan: port 6(wlan0) entered disabled state
[ 20.522254] mt798x-wmac 18000000.wifi wlan0: left allmulticast mode
[ 20.528566] mt798x-wmac 18000000.wifi wlan0: left promiscuous mode
[ 20.534870] br-lan: port 6(wlan0) entered disabled state
[ 20.564515] br-lan: port 6(wlan0) entered blocking state
[ 20.569842] br-lan: port 6(wlan0) entered disabled state
[ 20.575242] mt798x-wmac 18000000.wifi wlan0: entered allmulticast mode
[ 20.582005] mt798x-wmac 18000000.wifi wlan0: entered promiscuous mode
[ 20.696471] br-lan: port 7(wlan1) entered blocking state
[ 20.701834] br-lan: port 7(wlan1) entered disabled state
[ 20.707194] mt798x-wmac 18000000.wifi wlan1: entered allmulticast mode
[ 20.714005] mt798x-wmac 18000000.wifi wlan1: entered promiscuous mode
[ 20.773134] br-lan: port 7(wlan1) entered blocking state
[ 20.778457] br-lan: port 7(wlan1) entered forwarding state
[ 20.784643] mt798x-wmac 18000000.wifi wlan1: left allmulticast mode
[ 20.791026] mt798x-wmac 18000000.wifi wlan1: left promiscuous mode
[ 20.797435] br-lan: port 7(wlan1) entered disabled state
[ 20.853719] br-lan: port 7(wlan1) entered blocking state
[ 20.859140] br-lan: port 7(wlan1) entered disabled state
[ 20.864649] mt798x-wmac 18000000.wifi wlan1: entered allmulticast mode
[ 20.871572] mt798x-wmac 18000000.wifi wlan1: entered promiscuous mode
[ 20.878181] br-lan: port 7(wlan1) entered blocking state
[ 20.883525] br-lan: port 7(wlan1) entered forwarding state
[ 21.591206] br-lan: port 7(wlan1) entered disabled state
[ 22.534005] mt7530-mdio mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[ 22.534042] br-lan: port 3(lan3) entered blocking state
[ 22.547163] br-lan: port 3(lan3) entered forwarding state
[ 23.962298] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 31.474988] br-lan: port 6(wlan0) entered blocking state
[ 31.480316] br-lan: port 6(wlan0) entered forwarding state
[ 90.330332] br-lan: port 7(wlan1) entered blocking state
[ 90.335660] br-lan: port 7(wlan1) entered forwarding state
[ 266.263849] usb 2-1: USB disconnect, device number 2
[ 287.170582] usb 2-1: new SuperSpeed USB device number 3 using xhci-mtk
[ 287.206418] hub 2-1:1.0: USB hub found
[ 287.210545] hub 2-1:1.0: 4 ports detected
[ 287.354037] usb 1-2: new high-speed USB device number 2 using xhci-mtk
[ 287.543624] hub 1-2:1.0: USB hub found
[ 287.547718] hub 1-2:1.0: 4 ports detected
[ 287.640932] usb 2-1.4: new SuperSpeed USB device number 4 using xhci-mtk
[ 287.676706] scsi host0: uas
[ 287.680681] scsi 0:0:0:0: Direct-Access Seagate Basic 0712 PQ: 0 ANSI: 6
[ 290.648736] sd 0:0:0:0: [sda] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 290.656474] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 290.661912] sd 0:0:0:0: [sda] Write Protect is off
[ 290.666691] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[ 290.672057] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 290.681219] xhci-mtk 11200000.usb: ERROR Transfer event for unknown stream ring slot 3 ep 6
[ 290.689549] xhci-mtk 11200000.usb: @0000000041047260 719a4100 00000000 1a00000a 03078000
[ 290.817328] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 290.823593] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 290.837309] sda: sda1
[ 290.839874] sd 0:0:0:0: [sda] Attached SCSI disk
[ 303.694684] mt7530-mdio mdio-bus:1f lan2: Link is Up - 100Mbps/Full - flow control off
[ 303.694708] br-lan: port 2(lan2) entered blocking state
[ 303.707814] br-lan: port 2(lan2) entered forwarding state
[ 304.248161] br-lan: port 2(lan2) entered disabled state
[ 304.248253] mt7530-mdio mdio-bus:1f lan2: Link is Down
[ 7104.203526] br-lan: port 3(lan3) entered disabled state
[ 7104.203638] mt7530-mdio mdio-bus:1f lan3: Link is Down
[ 7106.373172] mt7530-mdio mdio-bus:1f lan3: Link is Up - 10Mbps/Full - flow control off
[ 7106.373209] br-lan: port 3(lan3) entered blocking state
[ 7106.386232] br-lan: port 3(lan3) entered forwarding state
[ 7106.639508] br-lan: port 3(lan3) entered disabled state
[ 7106.639619] mt7530-mdio mdio-bus:1f lan3: Link is Down
[10615.565929] mt798x-wmac 18000000.wifi wlan1: left allmulticast mode
[10615.572232] mt798x-wmac 18000000.wifi wlan1: left promiscuous mode
[10615.578502] br-lan: port 7(wlan1) entered disabled state
[16724.644246] mt7530-mdio mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control off
[16724.644272] br-lan: port 3(lan3) entered blocking state
[16724.657207] br-lan: port 3(lan3) entered forwarding state
[16725.941305] br-lan: port 3(lan3) entered disabled state
[16725.941414] mt7530-mdio mdio-bus:1f lan3: Link is Down
[16729.181990] mt7530-mdio mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[16729.182015] br-lan: port 3(lan3) entered blocking state
[16729.195123] br-lan: port 3(lan3) entered forwarding state
[16924.958939] br-lan: port 3(lan3) entered disabled state
[16924.959054] mt7530-mdio mdio-bus:1f lan3: Link is Down
[28596.596548] br-lan: port 7(wlan1) entered blocking state
[28596.601877] br-lan: port 7(wlan1) entered disabled state
[28596.607342] mt798x-wmac 18000000.wifi wlan1: entered allmulticast mode
[28596.614113] mt798x-wmac 18000000.wifi wlan1: entered promiscuous mode
[28596.621761] mt798x-wmac 18000000.wifi wlan1: left allmulticast mode
[28596.628067] mt798x-wmac 18000000.wifi wlan1: left promiscuous mode
[28596.634317] br-lan: port 7(wlan1) entered disabled state
[28596.695359] br-lan: port 7(wlan1) entered blocking state
[28596.700682] br-lan: port 7(wlan1) entered disabled state
[28596.706062] mt798x-wmac 18000000.wifi wlan1: entered allmulticast mode
[28596.712805] mt798x-wmac 18000000.wifi wlan1: entered promiscuous mode
[28602.725885] br-lan: port 7(wlan1) entered blocking state
[28602.731212] br-lan: port 7(wlan1) entered forwarding state
[56684.111706] mtk_soc_eth 15100000.ethernet eth1: Link is Down
[56686.265659] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 100Mbps/Half - flow control off
[56688.437091] mtk_soc_eth 15100000.ethernet eth1: Link is Down
[56691.708465] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 2.5Gbps/Full - flow control rx/tx
[56693.136530] mtk_soc_eth 15100000.ethernet eth1: Link is Down
[56695.290559] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 100Mbps/Half - flow control off
[56697.430504] mtk_soc_eth 15100000.ethernet eth1: Link is Down
[56700.482056] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 2.5Gbps/Full - flow control rx/tx
[60964.491858] mt7530-mdio mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control off
[60964.491888] br-lan: port 3(lan3) entered blocking state
[60964.504818] br-lan: port 3(lan3) entered forwarding state
[60965.398822] br-lan: port 3(lan3) entered disabled state
[60965.398927] mt7530-mdio mdio-bus:1f lan3: Link is Down
[60968.630867] mt7530-mdio mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[60968.630893] br-lan: port 3(lan3) entered blocking state
[60968.644004] br-lan: port 3(lan3) entered forwarding state
[65568.964798] usb 2-1: USB disconnect, device number 3
[65568.969765] usb 2-1.4: USB disconnect, device number 4
[65569.214854] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[65569.232930] usb 1-2: USB disconnect, device number 2
[65569.819312] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=DRIVER_OK
[65640.928815] usb 1-2: new high-speed USB device number 3 using xhci-mtk
