Port forwarding to repeater

[tomboy07]

Hi All, I have a flint 2 on 192.168.1.1 as main wan. Connected to this is a Beryl via repeater. Beryl is DHCP ing out to 192.168.8.0 range. Can i port forward an address on the Beryl from the Flint? Flint does not see 192.168.8.0 range on portforwarding Gui. Ta

[bruce]

Is this the topology?
ISP Modem (LAN) --- (WAN) Flint 2 (LAN) --- (WAN) Beryl AX

If you want to access the LAN of Beryl AX from Flint2, you need to manually add static routes in Flint2.

Here refer to:

Accessing USB flash drive network storage and printing with 2 different subnet network and routers

According to the previous thread you mentioned: Can the B3000 and AX1800 ping each other, including any of their devices? Example, can ping 192.168.10.121 on the 192.168.8.120? If the WAN -> LAN enables the forward to accept on the AX1800, [image] and configure add the route rule on the B3000, [image] The device from B3000, can ping to the device on AX1800, means that 192.168.8.120 - Device that needs to print is able to access 192.168.10.121 - HP Printer