Private VPN Gl-MT300 V2

Hello everyone.

I have a working VPN server on my private router and an Open VPN client on my Laptop, this setup works.

I bought a GL MT300 V2 to use the Open VPN client built into the MT300.

I tried to configure the MT300 Open VPN client but this one refuses the connection to my private VPN server.

The VPN user and password are correct as it works with my laptop.

I disconnected Open VPN from my laptop to have no other VPN and let the MT300 connect but the problem persists.

I have no message in the log.


Maybe there are some parameters that not supported, could you start the client first then ssh to the router and use /etc/init.d/startvpn reload to check the output error?