RSSI of Upstream Wi-Fi

Routers
1

Hi,

Is there a way to read RSSI, TX/RX speeds, etc, when using Repeater mode? I’m using a Flint 3 running 4.8.3.

2

Hi

The RSSI and TX/RX rate information could be obtained via SSH into the router and execute the following command:

# Use this command to find out which STA interface was used. 
iwinfo
# Then use this command to check related information. Normally, it's sta0 for 2.4 GHz, sta1 for 5 GHz and sta2 for 6 GHz. 
iwinfo sta1 assoclist