Running a OpenVPN and Wireguard server at the same time with a Mango

Routers VPN, DNS, Leaks
1

For over a year, I have had two Mangos. One is set up as an OpenVPN server and the other other an OpenVPN client.

I did two things that made my connection really unstable and unusable.
First, I updated both units to the latest firmware. I even defaulted them.

I also added a Wireguard server. I know you can have a wireguard client and an open vpn client connected at the same time. Are you allowed to have an OpenVPN and a Wireguard server running at the same time but just only have one protocol in use at any one time or can I only have one server running at the same time?

It seems to work well for my initial test but then the next morning, I could connect with the wireguard client to the server but virtually no data would pass.

2

Hello,

For the VPN client, it only supports running 1 client, like only WireGuard Client or OpenVPN client.

For the VPN server, it supports running WireGuard server and OpenVPN server at the same time.
But the WireGuard server is supposed to be connected and data normal in next day if the client is connected to server, please check:

  1. enable "Allow Remote Access LAN" in server router
  2. SSH to the client router, and ping [server tunnel IP] or ping [server router LAN IP]