Site to Site down when using WG Client

[K3rn3l_Ku5h]

I think you are supposed to start S2S first then you can start WireGuard, but you are correct in that GoodCloud does use WireGuard.

GoodCloud - GL.iNet Router Docs 4

I do remember a forum for Brume 2 where this was explained, try to find it

Goodcloud and VPN

It is very clear now. No need diagram. Unfortunately you need to set up route in your vpn servers. It could be complicated. Check this Add static route to other gateway on network (iptables or ebtables professional needed!) - #3 by mrgenie - Network and Wireless Configuration - OpenWrt Forum and firewall - How can I define static routes between two subnets in OpenWRT / LEDE? - Server Fault You can use a third router to join the S2S network and let the cloud to manage the router for you. Tha…

Is anyone actually running S2S without the Gl Cloud?

I am getting very frustrated with the inability to get S2S VPN going using Wireguard. Clients can reach hosts on the LAN side of the server, but cannot ping each other or client LAN hosts. Server is 10.0.0.1 and LAN is 192.168.8.0/24 Client A is an iPhone, 10.0.0.2 Client B is Windows 10.0.0.3 and LAN is 192.168.0.0/24 Both client A and B can ping 192.168.8.102. However, 10.0.0.3 cannot ping 10.0.0.2 and vice versa. Furthermore, neither the server nor client A can ping any hosts on 192.168.0…