Slate 1800 & Huawei USB 4G Modem (E3372)

Technical Support for Routers 4G LTE, 5G NR, USB modems
1

Hi,

modem works if it is connected directly to PC.
Attached to router led is blinking repeatly red and green.
Router interface did not show opportunity to choose tethering or cellular to connect.
Looks linke router did not recongnize the USB modem.
Any ideas?

Greetings from Berlin
Mnem0

2

GL iNet Slate 1800 and Huawei Modem already have different host IP adresses.

3

hi,
Are you using Huawei E3372 or 3372-s106 or 3372-h106? Could you try to re-plug the modem after system up? I have the same issue if I start the system after Huawei 3276s is pluged.

4

Hi, in admin panel of the modem I found these infos:
Device name E3372-325
Hardware version CL5E3372M
Software version 3.0.2.61(H057SP5C983)
Web UI version WEBUI 3.0.2.61(W13SP3C7201)

I already tried to replugin the modem several times.
Sometimes for some seconds a tethering device was regonized, but after some seconds it was gone and no connection was built.

KR

5

Hi!

I have excactly the same problem.
Is there already a solution?

Device name E3372-325
Hardware version CL5E3372M
Software version 3.0.2.61(H057SP5C983)
Web UI version WEBUI 3.0.2.61(W13SP3C7201)

6

hi，

E3372-325 is not supported/adapted on glinet router.