I tried to upgrade with settings that seems to fail networking wise.
but then I applied a reset and the UI stopped working after I had set my password.
luckily I got output from the logread perhaps its anything usefull?
edit to add: also the leds is blinking strange.
logread:
data.zip (13.9 KB)
dmesg (kernel log):
dmesg.zip (10.3 KB)
Edit tested by upgrading without keeping the settings:
the web UI keeps timing out after setting the password, also luci seems not to be accessible once the UI becomes unresponsive, the led lighting is flashing strangely.
it seems the demsg logs show something about failing to load or mount something about the wifi driver:
click to expand
[ 21.184339] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[ 21.196689] ath11k c000000.wifi: fw_version 0x2604835d fw_build_timestamp 2022-03-09 12:49 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
[ 21.230596] ath11k c000000.wifi: Direct firmware load for ath11k-macs failed with error -2
[ 21.230633] ath11k c000000.wifi: Falling back to sysfs fallback for: ath11k-macs
[ 21.291810] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[ 21.401202] ath11k c000000.wifi: qmi failed to load CAL data file:caldata.bin
[ 21.674841] remoteproc remoteproc0: stopped remote processor cd00000.remoteproc
[ 22.178161] ath11k c000000.wifi: qmi failed to load CAL data file:caldata.bin
[ 22.379933] ath11k c000000.wifi: Direct firmware load for ath11k/IPQ6018/hw1.0/qdss_trace_config.bin failed with error -2
[ 22.379976] ath11k c000000.wifi: Falling back to sysfs fallback for: ath11k/IPQ6018/hw1.0/qdss_trace_config.bin
[ 22.555765] ath11k c000000.wifi: Direct firmware load for qdss_trace_config.bin failed with error -2
[ 22.555805] ath11k c000000.wifi: Falling back to sysfs fallback for: qdss_trace_config.bin
[ 22.648140] ath11k c000000.wifi: qmi failed to load QDSS config: qdss_trace_config.bin
[ 22.648176] ath11k c000000.wifi: Failed to download QDSS config to FW: -12
and this one:
[ 21.178422] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
logs.zip (24.1 KB)
I updated from 4.0.1 pre-release 2.