Spitz AX (X3000) sending USSD-codes for activate SMS text service

Technical Support for Routers
1

Hi together

I got one router (Spitz AX / X3000). I use it with a multi SIM card.
If I like to activate SMS / text messages with my SIM card, my telco provider
expect the following command: 222#.
But this does not work with the Spit AX. Sure, I can send Manual commands
linke

AT+CUSD=1,"*222#",15 or AT+CUSD=1,"*222#",15

But this does not work.

I like to set this parameter from remote PC, because the router itself is mounted at the roof of my building.

Any ideas?

Thank you.

2

Hi,

Regarding this issue, could you please share the router with us via the GoodCloud, it requires to the modem team colleague to check:

Please PM me the MAC address and GL WebUI login passowrd.

4

Hi there, to check this issue, I need to remote to access the router by GoodCloud SSH to check if the USSD service of the modem is normal.

If this problem has been solved? If not, please let me know.