请问有人知道这设备怎么用吗?登录密码是什么?怎么刷新固件?不知怎么在帖子里贴图,上传不了图片。一个小方块,gl-inet6416A芯片,S/N d28b3c63fd4aaf88,登录地址是192.168.134.1,LAN、WAN口各1个,1个USB2.0,1个miniUSB口,1个reset按键。我电子邮箱1922411572@qq.com
看不到图片解释不清楚,但是不是我们自己的固件,也不知道密码。你试试uboot刷固件吧。
uboot openwrt-6416-2.264.bin后,LED红灯长亮,但无论是192.168.8.1,还是192.168.134.1都不能登录。谢谢您!
能否把您的邮箱地址发给我,我把图片发给您,麻烦您帮帮忙
是192.168.1.1啊。
https://docs.gl-inet.com/en/3/troubleshooting/debrick/这个网址我这儿打不开。192.168.1.1uboot openwrt-6416-2.264.bin,LED闪亮几次后红灯长亮,之后设IP为自动获取或相应网址,但无论是192.168.8.1,还是192.168.134.1都不能登录
- First you have to download firmware to your computer. You can download the firmware here. For GL-AR300M, GL-AR300M-Ext, GL-AR750S-Ext, please download the .img firmware file. For GL-B1300, GL-S1300, please download the .img firmware. Everyone else, download the .bin firmware file.
- Connect your computer to the Ethernet port (either LAN or WAN) of the router. You MUST leave the other port unconnected .
- Press and hold the Reset button firmly first, and then power on your device. (If your device does not have a power button, plugging it in will power it on automatically.)
- The Power LED will light up. Then, other LEDs will start flashing.
- Release your finger when you see the LED has flashed:
- 6 times for GL-MiFi, and then the LTE light will faintly flash twice.
- 5 times for GL-AR150, GL-AR300M, GL-USB150, GL-AR750, GL-AR750S-Ext (Slate), GL-X750-Ext (Spitz), GL-MT300N-V2.
- 4 times for GL-S1300, GL-B1300.
The leftmost LED may stay on the whole time while the rightmost LED flashes 4 times, then the middle LED turns on and stays on.
(For some old GL-B1300, the leftmost LED stays on the whole time, and both the middle LED and the rightmost LED flash 5 times at the same time then they stay on.)
- 3 times for GL-MT300N, GL-MT300A.
- Set your computer’s IP address to 192.168.1.2 . Please check the step-by-step guide for different operating systems below:
I did it. The LED is also blinking. I know the firmware should be written. Then the red light stayed on.