USB modem is not working with Slate 7 (GL-BE3600)

[bruce]

Hello,

May I know is this modem be work through the tethering connection with router?
(Other two seem to be unsupported in GL standard firmware. Sorry.)

@IDDQD

Netgear MR1000

About the T99W175 modem, you can refer to this thread:

How to enable T99W175 5G modem

Just to summarize what the authors steps for using T99W175 on any m.2 to USB conversion board including GL-M2: Modify the T99W175 according to this Russian website - https://4pda.to/forum/index.php?showtopic=1086317#Spoil-129097688-9 basically, soldering the two connectors; then use a tap to tap off the 2nd most right pin. This will make T99W175 in USB mode. This however, does not mean that T99W175 has 'AT' command interface enabled (enable ttyUSB) (This requires USB mode enable). The reaso…